From Surf Wiki (app.surf) — the open knowledge base

USS Koka (1865)

Twin-screw monitor of the US Navy

Field	Value
section1	{{Infobox ship/image
section2	{{Infobox ship/career
country	United States
flag
name	USS Koka
ordered	April 1863
builder	Wilcox & Whiting, Camden, New Jersey.
launched	18 May 1865
commissioned	Never commissioned
fate	Broken up, 2 October 1874
section3	{{Infobox ship/characteristics
class
displacement	1175 LT
length	225 ft
beam	45 ft
draft	9 ft
propulsion	Screw steamer
speed	9 kn
complement	69 officers and enlisted
armament	2 × 11 in smoothbore Dahlgren guns
armor	*Turret: 8 in
*Pilothouse: {{convert	10	in	mm	abbr	on}}
*Hull: {{convert	3	in	mm	abbr	on}}
*Deck: {{convert	3	in	mm	abbr	on}}

Pilothouse: 10 in
Hull: 3 in
Deck: 3 in '*USS Koka'''—a single-turreted, twin-screw monitor—was launched 18 May 1865 by Wilcox & Whiting, Camden, New Jersey. She was a *Casco''-class, light-draft monitor intended for service in the shallow bays, rivers, and inlets of the Confederacy. These warships sacrificed armor plate for a shallow draft and were fitted with a ballast compartment designed to lower them in the water during battle.

Design revisions

Though the original designs for the Casco-class monitors were drawn by John Ericsson, the final revision was created by Chief Engineer Alban C. Stimers following Rear Admiral Samuel F. Du Pont's failed bombardment of Fort Sumter in 1863. By the time that the plans were put before the Monitor Board in New York City, Ericsson and Simers had a poor relationship, and Chief of the Bureau of Construction and Repair John Lenthall had little connection to the board. This resulted in the plans being approved and 20 vessels ordered without serious scrutiny of the new design. $14 million US was allocated for the construction of these vessels. It was discovered that Stimers had failed to compensate for the armor his revisions added to the original plan and this resulted in excessive stress on the wooden hull frames and a freeboard of only 3 inches. Stimers was removed from the control of the project and Ericsson was called in to undo the damage. He was forced to raise the hulls of the monitors under construction by 22 inches to make them seaworthy.

Fate

As a result, the Navy Department suspended completion of the ship 17 June 1865, and she was laid up at League Island Navy Yard, Philadelphia, without any active service. Renamed Argos 15 June 1869, she was again renamed Koka 10 August that same year. She was broken up at Philadelphia on 2 October 1874, by Harlan & Hollingsworth Co., Wilmington, Delaware, for use in the construction of the .

References

Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

casco-class-monitors ships-built-in-camden,-new-jersey 1865-ships

Want to explore this topic further?

Ask Mako anything about USS Koka (1865) — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report