Surf Wiki
Save to docs
general/metal-forming

From Surf Wiki (app.surf) — the open knowledge base

Structural shape rolling

Structural shape rolling
Cross-sections of continuously rolled structural shapes, showing the change induced by each rolling mill.

Structural shape rolling, also known as shape rolling and profile rolling, is the rolling and roll forming of structural shapes by passing them through a rolling mill to bend or deform the workpiece to a desired shape while maintaining a constant cross-section. Structural shapes that can be made with this metal forming process include I-beams, H-beams, T-beams, U-beams, angle iron, channels, bar stock, and railroad rails. The most commonly rolled material is structural steel, including carbon steel and stainless steel. Other metals, plastic, paper, and glass can also be rolled. Common applications include railroads, bridges, roller coasters, art, and architectural applications.

It is a cost-effective way of bending these materials because the process requires less set-up time and uses pre-made dies that are changed according to the shape and dimension of the workpiece. This process can roll workpieces into full circles.

Process

Structural shape rolling uses profile rolling techniques where the workpiece is passed through a series of flatteners (of larger magnitude than most common rolling devices) that match the workpieces' cross-section. The most common method uses 3 rollers; the bending is controlled by varying the distance between the rollers.

Structural shapes can be rolled in different ways such as the “easy-way”, the “hard-way”, heel in/out, ball in/out, leg in/out, stem in/out, and off axis. The hard-way would be bending the workpiece in the orientation where its moment of inertia is the greatest. The easy-way is bending the workpiece along the axis with the smallest moment of inertia. For example, a piece of angle iron rolled the easy-way would be rolled along one of its flanges, while the hard-way would be along the angle itself.

References

References

  1. Boljanovic, Vukota. (2009). "Metal Shaping Processes". Industrial Press.
  2. "Rolled Structural Shapes". Arntzen Corporation.
  3. [http://www.paramount-roll.com/services/process.asp How We Form Steel to Bend Metal Pipes and Tubing (roll forming)]
  4. http://www.aasteelfab.com/structural_methods.php {{dead link. (January 2019)
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

metal-forming structural-steel
Want to explore this topic further?

Ask Mako anything about Structural shape rolling — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report