Stockade Building System

Design

The blocks were made up of a fibrous material with large interstices between the fibers. (One suggested fiber was excelsior, which is also known as wood wool.) Despite having large interstices, Fuller and Hewlett designed the blocks so they would not be absorbent. To make the blocks, the fibers were coated with plaster and molded in a form. This is called the Stockade Pneumatic Forming Process.

These blocks were cast with large holes in them so that a weight-bearing structure, such as concrete, could be poured inside them. The block's fibers were designed to be easily sawed so workers could cut holes in them to rest floor joists on the weight-bearing structure. The blocks came in various shapes and sizes. Some had two vertical holes for filling with concrete. Other blocks were much larger, with openings in the side for inserting large beams.

Field trials

The system was evaluated at a residence in Tarpon Springs, Florida, in 1926.

Patent

On October 8, 1926, Fuller and Hewlett filed for a patent for their brick design. After several months, on June 28, 1927, they received US patent #1,633,702 entitled Building System. It was an extension of Fuller's previous patent (US patent #1,604,097) from October 19, 1926.

References

References

1. Gruenwald, Hermann. "Building Systems Overview". University of Oklahoma College of Architecture.
2. "Building Structure".
3. "Chronological Biography". Buckminster Fuller Institute.
4. Blake, Trevor. "The Lost Inventions of BuckMinster Fuller (Part 2 of 3)". synchronofile.com - An Independent Resource on R. Buckminster Fuller.
5. [https://news.google.com/newspapers?id=MhdPAAAAIBAJ&sjid=kUwDAAAAIBAJ&pg=5640,6023439 “Florida’s New Product”, St. Petersburg Times, 25 March 1926]