Stearic acid

Production

In terms of its biosynthesis, stearic acid is produced from palmitoyl-CoA, with malonyl-CoA a two-carbon building block (after decarboxylation).

Stearic acid is obtained from fats and oils by the saponification of the triglycerides using hot water (about 100 °C). The resulting mixture is then distilled. Commercial stearic acid is often a mixture of stearic and palmitic acids, although purified stearic acid is available. Commercially, oleic acid, as found in palm and soy, can be hydrogenated to give stearic acid.

Uses and occurrence

In general, the applications of stearic acid exploit its bifunctional character, with a polar head group that can be attached to metal cations and a nonpolar chain that confers solubility in organic solvents. The combination leads to uses as a surfactant and softening agent. Stearic acid undergoes the typical reactions of saturated carboxylic acids, a notable one being reduction to stearyl alcohol, and esterification with a range of alcohols. This is used in a large range of manufactures, from simple to complex electronic devices.

Food

Of the saturated fatty acids consumed in the United States, stearic acid consumption is second (26% of total saturated fatty acid intake) to palmitic acid (56% of total saturated fatty acid intake). Examples of the use of stearic acid in food manufacturing include baked goods, frozen dairy products, gelatins, puddings, hard candy, and nonalcoholic beverages.

Stearic acid (E number E570) is found in some foods.

Soaps and cosmetics

Stearic acid is mainly used in the production of detergents, soaps, and cosmetics such as shampoos and shaving cream products. Stearate soap, such as sodium stearate, could be made from stearic acid but instead are usually produced by saponification of stearic acid-containing triglycerides. Esters of stearic acid with ethylene glycol (glycol stearate and glycol distearate) are used to produce a pearly effect in shampoos, soaps, and other cosmetic products.

Lubricants, softening and release agents

In view of the soft texture of the sodium salt, which is the main component of soap, other salts are also useful for their lubricating properties. Lithium stearate is an important component of grease. The stearate salts of zinc, calcium, cadmium, and lead are used as heat stabilizers for PVC. Stearic acid is used along with castor oil for preparing softeners in textile sizing. They are heated and mixed with caustic potash or caustic soda. Related salts are also commonly used as release agents, e.g. in the production of automobile tires. As an example, it can be used to make castings from a plaster piece mold or waste mold, and to make a mold from a shellacked clay original. In this use, powdered stearic acid is mixed in water and the suspension is brushed onto the surface to be parted after casting. This reacts with the calcium in the plaster to form a thin layer of calcium stearate, which functions as a release agent.

Stearic acid can be converted to zinc stearate, which is used as a lubricant for playing cards (fanning powder) to ensure a smooth motion when fanning. Stearic acid is a common lubricant during injection molding and pressing of ceramic powders.

Niche uses

Being inexpensive, nontoxic, and fairly inert, stearic acid finds many niche applications. Varied examples of stearic acid use in manufacturing include soaps and greases, household soap products, synthetic rubber, cosmetic and pharmaceutical creams and lotions, candles, phonograph records, lubricants, shoe and metal polishes, food packaging, and rubber compounds.

Stearic acid is used as a negative plate additive in the manufacture of lead-acid batteries. It is added at the rate of 0.6 g per kg of the oxide while preparing the paste. It is believed to enhance the hydrophobicity of the negative plate, particularly during dry-charging process. It also reduces the extension of oxidation of the freshly formed lead (negative active material) when the plates are kept for drying in the open atmosphere after the process of tank formation. As a consequence, the charging time of a dry uncharged battery during initial filling and charging (IFC) is comparatively lower, as compared to a battery assembled with plates which do not contain stearic acid additive. Fatty acids are classic components of candle-making. Stearic acid is used along with simple sugar or corn syrup as a hardener in candies.

Metabolism

An isotope labeling study in humans concluded that the fraction of dietary stearic acid that oxidatively desaturates to oleic acid is 2.4 times higher than the fraction of palmitic acid analogously converted to palmitoleic acid. Also, stearic acid is less likely to be incorporated into cholesterol esters. In epidemiologic and clinical studies, stearic acid was found to be associated with lowered LDL cholesterol in comparison with other saturated fatty acids.

Examples

;Salts

• Potassium stearate
• Calcium stearate
• Cobaltous stearate
• Lithium stearate
• Magnesium stearate
• Mercuric stearate
• Sodium stearate
• Zinc stearate ;Esters
• Estradiol stearate
• Glycol stearate
• Stearin
• Testosterone stearate

References

References

1. (1989). "Merck Index". [[Merck & Co..
2. (2010). "Supporting Information Solubility and Mass Transfer Coefficient Enhancement of Stearic Acid through Hydrotropy". Journal of Chemical & Engineering Data.
3. (2007-03-19). "stearic acid". Chemister.ru.
4. (1919). "Solubilities of Inorganic and Organic Compounds". D. Van Nostrand Company.
5. 
   0.46 kPa (200 °C)
   16.9 kPa (300 °C){{nist|name=Octadecanoic acid|id=C57114|accessdate=2014-06-15|mask=FFFF|units=SI}}
6. Vargaftik, Natan B.. (1993). "Handbook of Thermal Conductivity of Liquids and Gases". CRC Press.
7. (1955). "On the structure of the crystal form B of stearic acid". Acta Crystallographica.
8. {{CRC90
9. Science Lab.com. "Stearic acid MSDS".
10. (29 April 2023). "Stearic acid". PubChem, US National Library of Medicine.
11. (August 2014). "Invited review: Palmitic and stearic acid metabolism in lactating dairy cows". Journal of Dairy Science.
12. Gunstone, F. D., John L. Harwood, and Albert J. Dijkstra "The Lipid Handbook with Cd-Rom. 3rd ed. Boca Raton: CRC Press, 2007. {{ISBN. 0849396883. {{ISBN. 978-0849396885
13. (2006). "Fatty Acids".
14. (2001). "Lexicon of lipid nutrition (IUPAC Technical Report)". Pure and Applied Chemistry.
15. (2005). "Metallic Soaps".
16. Tsenga, Wenjea J.. (1999). "Influence of stearic acid on suspension structure and green microstructure of injection-molded zirconia ceramics". Ceramics International.
17. Emken, Edward A.. (1994). "Metabolism of dietary stearic acid relative to other fatty acids in human subjects". American Journal of Clinical Nutrition.