Stabilimento Tecnico Triestino

History

Austro-Hungarian ownership

Stabilimento Tecnico Triestino had its origins in a private shipyard founded by Gaspare Tonello at San Marco on the coastline west of Trieste, in 1838. In 1857 the shipyard was merged with a local manufacturer of marine engines to become STT. A second shipyard was also acquired, at San Rocco near the town of Muggia just south of Trieste.

STT was the largest and most important shipbuilder in the Austrian Empire and its successor state, the Austro-Hungarian Empire. The company built most of the Austro-Hungarian Navy's capital ships, as well as many merchant vessels. In the 1860s and 1870s, STT built five of the Austro-Hungarian Navy's seven centre-battery ships (a forerunner of the battleship), as well as a number of ironclads, cruisers, frigates and corvettes. Between 1884 and 1914, the company built 13 of the Austro-Hungarian Navy's 16 battleships, including all three battleships of the , all three of the , and three of the four . It also built the three coastal defence battleships of the .

In 1909 Rudolf Montecuccoli, chief of the Austro-Hungarian Navy, pressured STT (together with Škoda) to start work on two dreadnoughts, and , even though approval of the budget for them was held up in the Austro-Hungarian Reichstag who was concerned about Italy and France embarking on dreadnought projects of their own. Montecuccoli was compelled to resort to an intricate web of propaganda and deception to camouflage the fact that the new ships did not have Reichstag approval. He asserted that industry was financing the construction of two dreadnoughts on speculation; this was completely untrue, and both STT and Skoda were extremely nervous about the subterfuge. In the event, the two ships could not be laid down until after Montecuccoli took an expensive 32 million crown credit in 1910 upon his own responsibility. The parliamentary approval was only granted in March 1911, when the dreadnoughts were already under construction. STT then also got the contract for the .

By 1914, the San Rocco shipyard had five slipways of between 350 and 500 feet (three of which served to construct battleships) as well as a 350-foot dry dock and a 400-foot floating dock. The company had its own plant in Muggia for the manufacturer of engines and boilers, and a licence from the United Kingdom to produce Parsons steam turbines. In the years prior to World War I, the company's workforce had been gradually expanded from 2,700 to approximately 3,200.

Following Italy's entry into World War I against the Central Powers (which included Austria-Hungary), STT was stripped of its Italian name and given the patriotic German name Austriawerft. Austriawerft was contracted to build two new battleships during the war, but these were cancelled in 1915, probably due to the company's loss of skilled workers, most of whom were Italian. Two submarines contracted to the company later in the war also had to be cancelled due to the lack of experienced submarine technicians.

Italian ownership

After the Austro-Hungarian Empire broke up at the close of World War I, the region of Trieste was ceded to Italy and Austriawerft became an Italian firm, whereupon its original name, Stabilimento Tecnico Triestino, was restored. During the 1920s, STT built the heavy cruiser for the Italian navy, and the luxury commercial liner .

In 1929, STT merged with another Italian company, Cantieri Navale Triestino based at Monfalcone, to form Cantieri Riuniti dell' Adriatico (CRDA) (United Shipbuilders of the Adriatic), and the STT component was named CRDA Trieste. CRDA Trieste built a number of light and heavy cruisers for the Regia Marina Italia (Royal Italian Navy) between the wars, as well as some 27 submarines. The ocean liner was also constructed there in 1932.

During the Second World War, CRDA Trieste built two battleships for the Regia Marina, and . CRDA Trieste survived the postwar shakeup in the shipbuilding industry and went on to build several more commercial liners in the 1950s and 1960s, as well as a few naval vessels. In 1984, CRDA was sold to the Fincantieri Group, and its Trieste shipyards were no longer considered important ship construction or repair facilities. However, as of 2000, the shipyards still retained three dry docks capable of serving ships up to 25,000, 35,000 and 170,000 tons respectively.

Production

STT (Austria-Hungary)

The following table lists the capital ships built for the Austro-Hungarian Navy. An asterisk denotes a unique ship.

References: Conway's All the World's Fighting Ships 1860–1905 Historical Handbook of World Navies website, Naval History Flixco website

STT (Italy)

The following table lists ships built by STT after the Italian takeover.

Reference: Winklareth p. 292

CRDA Trieste

The following table lists ships built at the former STT shipyards after the company's 1929 merger with Cantieri Navale Triestino to form CRDA.

Reference: Winklareth pp. 292–293

Footnotes

References

• Capital ships of the Austro-Hungarian Navy, Historical Handbook of World Navies website.
• Ships built by Stabilimento Tecnico Triestino, Naval History Flixco website.
• Chesneau, Koleśnik & Campbell (1979): Conway's All the World's Fighting Ships 1860–1905, Conway, , pp. 267–277. Extract.
• Preston, Antony (2002): The World's Worst Warships, Conway Publishing, , p. 65.
• Vego, Milan N. (1996): Austro-Hungarian Naval Policy, 1904–14, Taylor & Francis, , p. 30.
• Winklareth, Robert J. (2000): Naval Shipbuilders of the World – From the Age of Sail to the Present Day, Chatham Publishing, , pp. 292–293.

it:Cantiere navale di Trieste#Stabilimento Tecnico Triestino

References

1. Winklareth, p. 292.
2. Preston, p. 65—[https://books.google.com/books?id=EQwO1N-d8tEC&dq=%22Stabilimento+Tecnico+Triestino%22+&pg=PA65 Extract]. (the ''Tegetthoff'' class was also known as the ''Viribus Unitus'' class).
3. Vego, p. 30—[https://books.google.com/books?id=qU4MJvR_yUAC&dq=+established+%22Stabilimento+Tecnico+Triestino+%22&pg=PA30 Extract].
4. Winklareth, p. 293.
5. Disp.=displacement in tons. For commercial vessels (ie ocean liners), it represents gross tonnage (GRT).
6. Asterisk indicates that this is the only ship in its class.
7. Not to be confused with the ''Radetzky''-class battleship.
8. Most of Austria-Hungary's ships were confiscated as part of war reparations by the victorious Allies after World War One.
9. Not to be confused with the ''Tegetthoff''-class battleships, which came later.
10. Also known as the ''Erzherzog Franz Ferdinand'' class.
11. Also known as the ''Viribus Unitis'' class.
12. List may be incomplete.