Radioisotope thermoelectric generator

History

The RTG was invented in 1954 by Mound Laboratories scientists Kenneth (Ken) C. Jordan (1921–2008) and John Birden (1918–2011). They were inducted into the National Inventors Hall of Fame in 2013. Jordan and Birden worked on an Army Signal Corps contract (R-65-8- 998 11-SC-03-91) beginning on 1 January 1957, to conduct research on radioactive materials and thermocouples suitable for the direct conversion of heat to electrical energy using polonium-210 as the heat source. RTGs were developed in the US during the late 1950s by Mound Laboratories in Miamisburg, Ohio, under contract with the United States Atomic Energy Commission. The project was led by Dr. Bertram C. Blanke.

The first RTG launched into space by the United States was SNAP 3B in 1961 powered by 96 grams of plutonium-238 metal, aboard the Navy Transit 4A spacecraft. One of the first terrestrial uses of RTGs was in 1966 by the US Navy at uninhabited Fairway Rock in Alaska. RTGs were used at that site until 1995.

A common RTG application is spacecraft power supply. Several generations of RTG design have been used for probes that traveled far from the Sun, rendering solar panels impractical. As such, they have been used for Pioneer 10 and 11; Voyager 1 and 2; Galileo; Ulysses; Cassini; New Horizons; and are planned for the Dragonfly mission to Titan. RTGs were also used instead of solar panels to power the two Viking landers, and for the scientific experiments left on the Moon by the crews of Apollo 12 through 17 (SNAP 27s). Because the Apollo 13 Moon landing was aborted, its RTG rests in the South Pacific Ocean, in the vicinity of the Tonga Trench. The Curiosity and Perseverance Mars rover designs selected RTGs to allow greater flexibility in landing sites and longer lifespan than the solar-powered option, as used in prior generations of rovers. RTGs were also used for the Nimbus, Transit and LES satellites. By comparison, only a few space vehicles have been launched using full-fledged nuclear reactors: the Soviet RORSAT series and the American SNAP-10A.

In addition to spacecraft, the Soviet Union built 1,007 RTGs Many different types of RTGs (including Beta-M type) were built in the Soviet Union for a wide variety of purposes. The lighthouses were not maintained for many years after the dissolution of the Soviet Union in 1991. Some of the RTG units disappeared during this time—either by looting or by the natural forces of ice/storm/sea.

As of 1992, the United States Air Force also used RTGs to power remotely-located Arctic equipment, and the US government has used hundreds of such units to power remote stations globally. Sensing stations for Top-ROCC and SEEK IGLOO radar systems, predominantly located in Alaska, use RTGs. The units use strontium-90, and a larger number of such units have been deployed both on the ground and on the ocean floor than have been used on spacecraft, with public regulatory documents suggesting that the US had deployed at least 100–150 during the 1970s and 1980s.

In the past, small "plutonium cells" (very small Pu-powered RTGs) were used in implanted heart pacemakers to ensure a very long "battery life". , about ninety were still in use. By the end of 2007, the number was reported to be down to just nine. The Mound Laboratory Cardiac Pacemaker program began on 1 June 1966, in conjunction with NUMEC. When it was recognized that the heat source would not remain intact during cremation, the program was cancelled in 1972 because there was no way to completely ensure that the units would not be cremated with their users' bodies.

Design

The design of an RTG is simple by the standards of nuclear technology: the main component is a sturdy container of a radioactive material (the fuel). Thermocouples are placed in the walls of the container, with the outer end of each thermocouple connected to a heat sink. Radioactive decay of the fuel produces heat. It is the temperature difference between the fuel and the heat sink that allows the thermocouples to generate electricity.

A thermocouple is a thermoelectric device that can convert thermal energy directly into electrical energy using the Seebeck effect. It is made of two kinds of metal or semiconductor material. If they are connected to each other in a closed loop and the two junctions are at different temperatures, an electric current will flow in the loop. Typically a large number of thermocouples are connected in series to generate a higher voltage.

RTGs and fission reactors use very different nuclear reactions. Nuclear power reactors (including the miniaturized ones used in space) perform controlled nuclear fission in a chain reaction. The rate of the reaction can be controlled with neutron absorbing control rods, so power can be varied with demand or shut off (almost) entirely for maintenance. However, care is needed to avoid uncontrolled operation at dangerously high power levels, or even nuclear accident. Chain reactions do not occur in RTGs. Heat is produced through spontaneous radioactive decay at a non-adjustable and steadily decreasing rate that depends only on the amount of fuel isotope and its half-life. In an RTG, heat generation cannot be varied with demand or shut off when not needed and it is not possible to save more energy for later by reducing the power consumption. Therefore, auxiliary power supplies (such as rechargeable batteries) may be needed to meet peak demand, and adequate cooling must be provided at all times including the pre-launch and early flight phases of a space mission. While spectacular failures like a nuclear meltdown or explosion are impossible with an RTG, there is still a risk of radioactive contamination if the rocket explodes, the device reenters the atmosphere and disintegrates, terrestrial RTGs are damaged by storms or seasonal ice, or are vandalized.

File:Voyager Program - RTG diagram 1.png|Diagram of RTG fuel container, showing the plutonium-238 oxide spheres File:Voyager Program - RTG diagram 2.png|Diagram of RTG shell, showing the power-producing silicon-germanium thermocouples File:Voyager Program - RTG upclose.png|Model of an RTG unit

Developments

Due to the shortage of plutonium-238, a new kind of RTG assisted by subcritical reactions has been proposed. In this kind of RTG, the alpha decay from the radioisotope is also used in alpha-neutron reactions with a suitable element such as beryllium. This way a long-lived neutron source is produced. Because the system has a criticality close to but less than 1, i.e. K

RTG have been proposed for use on realistic interstellar precursor missions and interstellar probes. An RTG using Am was proposed for this type of mission in 2002. This could support mission extensions up to 1000 years on the interstellar probe, because Am decays more slowly than Pu. The RTG electricity can be used for powering scientific instruments and communication to Earth on the probes. One mission proposed using the electricity to power ion engines, calling this method radioisotope electric propulsion (REP).

A power enhancement for radioisotope heat sources based on a self-induced electrostatic field has been proposed. According to the authors, enhancements of 5-10% could be attainable using beta sources.

Models

A typical RTG is powered by radioactive decay and features electricity from thermoelectric conversion, but for the sake of knowledge, some systems with some variations on that concept are included here.

{{anchor|Nuclear power systems in space}} Space

Main article: Nuclear power in space, List of nuclear power systems in space

Known spacecraft/nuclear power systems and their fate. Systems face a variety of fates, for example, Apollo's SNAP-27 were left on the Moon. Some other spacecraft also have small radioisotope heaters, for example each of the Mars Exploration Rovers have a 1 watt radioisotope heater. Spacecraft use different amounts of material, for example MSL Curiosity has 4.8 kg of plutonium-238 dioxide.

** not really an RTG, the BES-5 Buk (БЭС-5) reactor was a fast reactor which used thermocouples based on semiconductors to convert heat directly into electricity

*** not really an RTG, the SNAP-10A used enriched uranium fuel, zirconium hydride as a moderator, liquid sodium potassium alloy coolant, and was activated or deactivated with beryllium reflectors Reactor heat fed a thermoelectric conversion system for electrical production.

**** not really an RTG, the ASRG uses a Stirling power device that runs on radioisotope (see Stirling radioisotope generator)

Terrestrial

Fuels

thumb|Inspection of [[Cassini-Huygens]] RTGs before launch thumb|[[New Horizons]] in assembly hall

The radioactive material used in RTGs must have several characteristics:

1. Its half-life must be long enough so that it will release energy at a relatively constant rate for a reasonable amount of time. The amount of energy released per time (power) of a given quantity is inversely proportional to half-life. An isotope with twice the half-life and the same energy per decay will release power at half the rate per mole. Typical half-lives for radioisotopes used in RTGs are therefore several decades, although isotopes with shorter half-lives could be used for specialized applications.
2. For spaceflight use, the fuel must produce a large amount of power per mass and volume (density). Density and weight are not as important for terrestrial use, unless there are size restrictions. The decay energy can be calculated if the energy of radioactive radiation or the mass loss before and after radioactive decay is known. Energy release per decay is proportional to power production per mole.
3. Radiation must be of a type easily absorbed and transformed into thermal radiation, preferably alpha radiation. Beta radiation can emit considerable gamma/X-ray radiation through bremsstrahlung secondary radiation production and therefore requires heavy shielding. Isotopes must not produce significant amounts of gamma, neutron radiation or penetrating radiation in general through other decay modes or decay chain products.

The first two criteria limit the number of possible fuels to fewer than thirty nuclides within the entire table of nuclides.

Plutonium-238, curium-244, strontium-90, and most recently americium-241 are the most often cited candidate isotopes, but 43 more isotopes out of approximately 1,300 were considered at the beginning in the 1950s.

The table below does not necessarily give power densities for the pure material but for a chemically inert form. For actinides this is of little concern as their oxides are usually inert enough (and can be transformed into ceramics further increasing their stability), but for alkali metals and alkaline earth metals like caesium or strontium respectively, relatively complex (and heavy) chemical compounds have to be used. For example, strontium is commonly used as strontium titanate in RTGs, which increases molar mass by about a factor of 2. Furthermore, depending on the source, isotopic purity may not be obtainable. Plutonium extracted from spent nuclear fuel has a low share of Pu-238, so plutonium-238 for use in RTGs is usually purpose-made by neutron irradiation of neptunium-237, further raising costs. Caesium in fission products is almost equal parts Cs-135 and Cs-137, plus significant amounts of stable Cs-133 and, in "young" spent fuel, short lived Cs-134. If isotope separation, a costly and time-consuming process, is to be avoided, this has to be factored in, too. While historically RTGs have been rather small, there is in theory nothing preventing RTGs from reaching into the megawatt range of power. However, for such applications actinides are less suitable than lighter radioisotopes as the critical mass is orders of magnitude below the mass needed to produce such amounts of power. As Sr-90, Cs-137 and other lighter radionuclides cannot maintain a nuclear chain reaction under any circumstances, RTGs of arbitrary size and power could be assembled from them if enough material can be produced. In general, however, potential applications for such large-scale RTGs are more the domain of small modular reactors, microreactors or non-nuclear power sources.

²³⁸Pu

Plutonium-238 has a half-life of 87.7 years, reasonable power density of 0.57 watts per gram, and exceptionally low gamma and neutron radiation levels. Pu has the lowest shielding requirements. Only three candidate isotopes meet the last criterion (not all are listed above) and need less than 25 mm of lead shielding to block the radiation. Pu (the best of these three) needs less than 2.5 mm, and in many cases, no shielding is needed in a Pu RTG, as the casing itself is adequate. Pu has become the most widely used fuel for RTGs, in the form of plutonium(IV) oxide (PuO). However, plutonium(IV) oxide containing a natural abundance of oxygen emits neutrons at the rate of roughly n/sec/g of Pu. This emission rate is relatively high compared to the neutron emission rate of plutonium-238 metal. The metal containing no light element impurities emits roughly n/sec/g of Pu. These neutrons are produced by the spontaneous fission of Pu.

The difference in the emission rates of the metal and the oxide is due mainly to the alpha, neutron reaction with the oxygen-18 and oxygen-17 in the oxide. The normal amount of oxygen-18 present in the natural form is 0.204% while that of oxygen-17 is 0.037%. The reduction of the oxygen-17 and oxygen-18 present in the plutonium dioxide will result in a much lower neutron emission rate for the oxide; this can be accomplished by a gas phase O exchange method. Regular production batches of PuO particles precipitated as a hydroxide were used to show that large production batches could be effectively O-exchanged on a routine basis. High-fired PuO microspheres were successfully O-exchanged showing that an exchange will take place regardless of the previous heat treatment history of the PuO. This lowering of the neutron emission rate of PuO2 containing normal oxygen by a factor of five was discovered during the cardiac pacemaker research at Mound Laboratory in 1966, due in part to the Mound Laboratory's experience with production of stable isotopes beginning in 1960. For production of the large heat sources the shielding required would have been prohibitive without this process.See the Pu-238 heat sources fabricated at Mound, revised table:

Unlike the other three isotopes discussed in this section, Pu must be specifically synthesized and is not abundant as a nuclear waste product. At present only Russia has maintained high-volume production, while in the US, no more than 50 g were produced in total between 2013 and 2018. The US agencies involved desire to begin the production of the material at a rate of 300 to per year. If this plan is funded, the goal would be to set up automation and scale-up processes in order to produce an average of 1.5 kg per year by 2025.

⁹⁰Sr

Strontium-90 has been used by the Soviet Union in terrestrial RTGs. Sr decays by β decay into Y, which quickly β-decays again. It has a lower decay energy than Pu, but its shorter half-life of 28.8 years and lower atomic weight yield a power density for pure metal of 0.95 watts per gram. Starting from the oxide or the native metal, one pathway to obtaining SrTiO is to let it transform to strontium hydroxide in aqueous solution, which absorbs carbon dioxide from air to become less soluble strontium carbonate. Reaction of strontium carbonate with titanium dioxide at high temperature produces the desired strontium titanate plus carbon dioxide. If desired, the strontium titanate product can then be formed into a ceramic-like aggregate via sintering.

²¹⁰Po

Some prototype RTGs, first built in 1958 by the US Atomic Energy Commission, have used polonium-210. This isotope provides phenomenal power density (pure Po emits 140 W/g) because of its high decay rate, but has limited use because of its very short half-life of 138 days. A half-gram sample of Po reaches temperatures of over 500 C. As Po is a pure alpha-emitter and does not emit significant gamma or X-ray radiation, the shielding requirements are as low as those for Pu. While the short half-life also reduces the time during which accidental release to the environment is a concern, polonium-210 is extremely radiotoxic if ingested and can cause significant harm even in chemically inert forms, which pass through the digestive tract as a "foreign object". A common route of production (whether accidental or deliberate) is neutron irradiation of , the only naturally occurring isotope of bismuth. It is this accidental production that is cited as an argument against the use of lead-bismuth eutectic as a coolant in liquid metal reactors. However, if a sufficient demand for polonium-210 exists, its extraction could be worthwhile similar to how tritium is economically recovered from the heavy water moderator in CANDUs.

²⁴¹Am

Americium-241 is a candidate isotope with much greater availability than Pu. Though Am has a half-life of 432 years, which is about five times longer than that of Pu and could hypothetically power a device for centuries, missions with more than 10 years were not the subject of the research until 2019. The power density of Am is only one-fourth that of Pu, and Am produces more penetrating radiation through decay chain products than Pu and needs more shielding. Its shielding requirements in a RTG are the third lowest: only Pu and Po require less. With a current global shortage of Pu, Am is being studied as RTG fuel by ESA and in 2019, UK's National Nuclear Laboratory announced the generation of usable electricity. An advantage over Pu is that it is produced as nuclear waste and is nearly isotopically pure. Prototype designs of Am RTGs expect 2–2.2 W/kg for 5–50 W RTGs design but practical testing shows that only 1.3–1.9 W can be achieved. Americium-241 is currently used in small quantities in household smoke detectors and thus its handling and properties are well-established. However, it decays to neptunium-237, the most chemically mobile among the actinides.

²⁵⁰Cm

Curium-250 is the isotope with the lowest atomic number that primarily decays by spontaneous fission, a process that releases many times more energy than alpha decay. Compared to plutonium-238, curium-250 has about a quarter of the power density, but 95 times the half-life (~8300 years vs. ~87 years). As it is a neutron emitter (weaker than californium-252 but not negligible) some applications require a further shielding against neutron radiation. As lead, which is an excellent shielding material against gamma rays and beta ray induced Bremsstrahlung, is not a good neutron shield (instead reflecting most of them), a different shielding material would have to be added in applications where neutrons are a concern.

Life span

Most RTGs use Pu, which decays with a half-life of 87.7 years. RTGs using this material therefore diminish in power output by a factor of 1 – (1/2), or 0.787%, per year.

One example is the MHW-RTG used by the Voyager probes. In the year 2000, 23 years after production, the radioactive material inside the RTG had decreased in power by 16.6%, i.e. providing 83.4% of its initial output; starting with a capacity of 470 W, after this length of time it would have a capacity of only 392 W. A related loss of power in the Voyager RTGs is the degrading properties of the bi-metallic thermocouples used to convert thermal energy into electrical energy; the RTGs were working at about 67% of their total original capacity instead of the expected 83.4%. By the beginning of 2001, the power generated by the Voyager RTGs had dropped to 315 W for Voyager 1 and to 319 W for Voyager 2. By 2022, these numbers had dropped to around 220 W.

NASA has developed a multi-mission radioisotope thermoelectric generator (MMRTG) in which the thermocouples would be made of skutterudite, a cobalt arsenide (CoAs), which can function with a smaller temperature difference than the current tellurium-based designs. This would mean that an otherwise similar RTG would generate 25% more power at the beginning of a mission and at least 50% more after seventeen years. NASA hopes to use the design on the next New Frontiers mission.

Safety

Theft

Radioactive materials in RTGs are dangerous and can be used for malicious purposes. They are not useful for a genuine nuclear weapon, but still can serve in a "dirty bomb". The Soviet Union constructed many uncrewed lighthouses and navigation beacons powered by RTGs using strontium-90 (Sr). They are very reliable and provide a steady source of power. Most have no protection, not even fences or warning signs, and the locations of some of these facilities are no longer known due to poor record keeping. In one instance, the radioactive compartments were opened by a thief. In another case, three woodsmen in Tsalenjikha Region, Georgia found two ceramic RTG orphan sources that had been stripped of their shielding; two of the woodsmen were later hospitalized with severe radiation burns after carrying the sources on their backs. The units were eventually recovered and isolated. There are about 1,000 such RTGs in Russia, all of which have long since exceeded their designed operational lives of ten years. Most of these RTGs likely no longer function, and may need to be dismantled. Some of their metal casings have been stripped by metal hunters, despite the risk of radioactive contamination. Transforming the radioactive material into an inert form reduces the danger of theft by people unaware of the radiation hazard (such as happened in the Goiânia accident in an abandoned Cs-137 source where the caesium was present in easily water-soluble caesium chloride form). However, a sufficiently chemically skilled malicious actor could extract a volatile species from inert material and/or achieve a similar effect of dispersion by physically grinding the inert matrix into a fine dust.

Radioactive contamination

RTGs pose a risk of radioactive contamination: if the container holding the fuel leaks, the radioactive material may contaminate the environment.

For spacecraft, the main concern is that if an accident were to occur during launch or a subsequent passage of a spacecraft close to Earth, harmful material could be released into the atmosphere; therefore their use in spacecraft and elsewhere has attracted controversy.

However, this event is not considered likely with current RTG cask designs. For instance, the environmental impact study for the Cassini–Huygens probe launched in 1997 estimated the probability of contamination accidents at various stages in the mission. The probability of an accident occurring which caused radioactive release from one or more of its three RTGs (or from its 129 radioisotope heater units) during the first 3.5 minutes following launch was estimated at 1 in 1,400; the chances of a release later in the ascent into orbit were 1 in 476; after that the likelihood of an accidental release fell off sharply to less than 1 in a million. If an accident which had the potential to cause contamination occurred during the launch phases (such as the spacecraft failing to reach orbit), the probability of contamination actually being caused by the RTGs was estimated at 1 in 10. The launch was successful and Cassini–Huygens reached Saturn.

To minimize the risk of the radioactive material being released, the fuel is stored in individual modular units with their own heat shielding. They are surrounded by a layer of iridium metal and encased in high-strength graphite blocks. These two materials are corrosion- and heat-resistant. Surrounding the graphite blocks is an aeroshell, designed to protect the entire assembly against the heat of reentering the Earth's atmosphere. The plutonium fuel is also stored in a ceramic form that is heat-resistant, minimising the risk of vaporization and aerosolization. The ceramic is also highly insoluble.

The plutonium-238 used in these RTGs has a half-life of 87.74 years, in contrast to the 24,110 year half-life of plutonium-239 used in nuclear weapons and reactors. Due to the shorter half-life, plutonium-238 is about 275 times more radioactive than plutonium-239 (i.e. 17.3 Ci/g compared to 0.063 Ci/g). For instance, 3.6 kg of plutonium-238 undergoes the same number of radioactive decays per second as 1 tonne of plutonium-239. Since the morbidity of the two isotopes in terms of absorbed radioactivity is almost exactly the same, plutonium-238 is around 275 times more toxic by weight than plutonium-239.

The alpha radiation emitted by either isotope will not penetrate the skin, but it can irradiate internal organs if plutonium is inhaled or ingested. Particularly at risk is the skeleton, the surface of which is likely to absorb the isotope, and the liver, where the isotope will collect and become concentrated.

A case of RTG-related irradiation is the Lia radiological accident in Georgia, December 2001. Strontium-90 RTG cores were dumped behind, unlabelled and improperly dismantled, near the Soviet-built Enguri Dam. Three villagers from the nearby village of Lia were unknowingly exposed to it and injured; one of them died in May 2004 from the injuries sustained. The International Atomic Energy Agency led recovery operations and organized medical care. Two remaining RTG cores are yet to be found as of 2022.

Accidents

There have been several known accidents involving RTG-powered spacecraft:

1. A launch failure on 21 April 1964 in which the U.S. Transit-5BN-3 navigation satellite failed to achieve orbit and burned up on re-entry north of Madagascar. The 17000 Ci plutonium metal fuel in its SNAP-9a RTG was ejected into the atmosphere over the Southern Hemisphere where it burned up, and traces of plutonium-238 were detected in the area a few months later. This incident resulted in the NASA Safety Committee requiring intact reentry in future RTG launches, which in turn impacted the design of RTGs in the pipeline.
2. The Nimbus B-1 weather satellite, whose launch vehicle was deliberately destroyed shortly after launch on 21 May 1968 because of erratic trajectory. Launched from the Vandenberg Air Force Base, its SNAP-19 RTG containing relatively inert plutonium dioxide was recovered intact from the seabed in the Santa Barbara Channel five months later and no environmental contamination was detected.The RTGs were returned to Mound for disassembly and the PuO microsphere fuel recovered and reused.
3. In 1969 the launch of the first Lunokhod lunar rover mission failed, spreading polonium-210 over a large area of Russia.
4. The failure of the Apollo 13 mission in April 1970 meant that the Lunar Module reentered the atmosphere carrying an RTG and burned up over Fiji. It carried a SNAP-27 RTG containing 44,500 Ci of plutonium dioxide in a graphite cask on the lander leg which survived reentry into the Earth's atmosphere intact, as it was designed to do, the trajectory being arranged so that it would plunge into 6–9 kilometers of water in the Tonga trench in the Pacific Ocean. The absence of plutonium-238 contamination in atmospheric and seawater sampling confirmed the assumption that the cask is intact on the seabed. The cask is expected to contain the fuel for at least 10 half-lives (870 years). The US Department of Energy has conducted seawater tests and determined that the graphite casing, which was designed to withstand reentry, is stable and no release of plutonium should occur. Subsequent investigations have found no increase in the natural background radiation in the area. The Apollo 13 accident represents an extreme scenario because of the high re-entry velocities of the craft returning from cis-lunar space (the region between Earth's atmosphere and the Moon). This accident has served to validate the design of later-generation RTGs as highly safe.
5. Mars 96 was launched by Russia in 1996, but failed to leave Earth orbit, and re-entered the atmosphere a few hours later. The two RTGs onboard carried in total 200 g of plutonium and are assumed to have survived reentry as they were designed to do. They are thought to now lie somewhere in a northeast–southwest running oval 320 km long by 80 km wide which is centred 32 km east of Iquique, Chile.

A SNAP-19C RTG was lost near the top of Nanda Devi mountain in India in 1965, when it was stored in a rock formation near the top of the mountain in the face of a snowstorm. It was intended to power a CIA remote automated intelligence station collecting telemetry from the Chinese rocket testing facility at Lop Nur. The seven capsules were probably carried down the mountain onto a glacier by a subsequent avalanche and have never been recovered. It is most likely that they melted through the glacier and were pulverized, whereupon the Pu–Zr alloy fuel oxidized soil particles that are moving in a plume under the glacier. As the glaciers from these peaks feed some of India's largest rivers, including the Ganges, there are concerns about massive radioactive contamination originating from these RTGs. Accounts from the operatives who attempted the installation recounted that the sherpas who aided their mission jockeyed to carry the capsules as they produced heat; referring to the capsules as Guru Rinpoche, the warmth offered some respite from the freezing winds, but some of the operatives thought the capsules were inadequately shielded and irradiated the men around them.

Many Beta-M RTGs produced by the Soviet Union to power lighthouses and beacons have become orphaned sources of radiation. Its design allowed for the use of normal industrial bolts instead of intrinsically safe or safety interlocked bolts (most likely to reduce cost), and did not require the use of intrinsically safe opening mechanisms or made any use of tamper resistant shielding systems. Several of these units have also been illegally dismantled for scrap metal, or been exposed to storm conditions, freezing and water penetration, common issues in those abandoned in the harsh Russian arctic. Some have even fallen into the ocean, or have defective shielding due to poor design or physical damage. The US Department of Defense cooperative threat reduction program has expressed concern that material from the Beta-M RTGs can be used by terrorists to construct a dirty bomb. However, the strontium titanate perovskite used is resistant to all likely forms of environmental degradation and cannot melt or dissolve in water. Bioaccumulation is unlikely as SrTiO passes through the digestive tract of humans or other animals unchanged, but the animal or human who ingested it would still receive a significant radiation dose to the sensitive intestinal lining during passage. Mechanical degradation of "pebbles" or larger objects into fine dust is more likely and could disperse the material over a wider area, however this would also reduce the risk of any single exposure event resulting in a high dose.

Notes

References

• Safety discussion of the RTGs used on the Cassini-Huygens mission.
• Nuclear Power in Space (PDF)
• Detailed report on Cassini RTG (PDF)
• Detailed lecture on RTG fuels (PDF)
• Detailed chart of all radioisotopes
• Stirling Thermoelectic Generator
• Toxicity profile for plutonium, Agency for Toxic substances and Disease Registry, U.S. Public Health Service, December 1990
• Environmental Impact of Cassini-Huygens Mission.
• Expanding Frontiers with Radioisotope Power Systems (PDF)

References

1. "Burnt Mountain Alaska RTG Extraction, Transport and Disposal Project - 17359".
2. "NIHF Inductee Kenneth C. Jordan".
3. "NIHF Inductee John Birden".
4. "National Inventors Hall of Fame entry for Ken Jordan".
5. "National Inventors Hall of Fame entry for John Birden".
6. (1960). "Nuclear Battery-Thermocouple Type Summary Report". United States Atomic Energy Commission.
7. (Spring 2000). "General Safety Considerations". Fusion Technology Institute, [[University of Wisconsin–Madison]].
8. (November 2006). "Final Environmental Impact Statement for the Mars Science Laboratory Mission".
9. "Why does Curiosity use an RTG rather than solar (as Spirit and Opportunity do) for power?".
10. (2 April 2005). "Radioisotope Thermoelectric Generators". [[Bellona Foundation.
11. [http://www.wiseinternational.org/node/701 "Alaska fire threatens air force nukes"] {{Webarchive. link. (25 February 2021 . [[World Information Service on Energy). WISE]]. 16 October 1992. Accessed 15 March 2021.
12. [https://osrp.lanl.gov/pacemakers.shtml "Nuclear-Powered Cardiac Pacemakers"]. [[Los Alamos National Laboratory]].
13. (2007-12-19). "Nuclear pacemaker still energized after 34 years". Reuters.
14. "Cardiac Pacemaker". Monsanto Research Corporation.
15. Marketing, Metric. (2024-01-08). "Insights Into Radioisotope Thermoelectric Generators".
16. Williams, H. R.. (2012). "A conceptual spacecraft radioisotope thermoelectric and heating unit (RTHU)". International Journal of Energy Research.
17. Arias, F. J.. (2011). "Advanced Subcritical Assistance Radioisotope Thermoelectric Generator: An Imperative Solution for the Future of NASA Exploration". [[Journal of the British Interplanetary Society]].
18. "Areas of Research".
19. "Innovative Interstellar Probe". [[Applied Physics Laboratory.
20. (7 May 2002). "Interstellar Explorer". Applied Physics Laboratory, Johns Hopkins University.
21. (November 2015). "Self-induced electrostatic-boosted radioisotope heat sources". Progress in Nuclear Energy.
22. Harland, D. M.. (2011). "Apollo 12 – On the Ocean of Storms". Springer Science & Business Media.
23. (2 March 2011). "Mars Science Laboratory Launch Nuclear Safety". NASA/JPL/DoE.
24. "Totse.com | Nuclear Power in Space".
25. [https://fas.org/nuke/space/bennett0706.pdf "Space Nuclear Power"] G.L.Bennett 2006
26. "SNAP-27". [[National Air and Space Museum.
27. "SNAP Overview". USDOE ETEC.
28. Chitaykin, V.I. "Use of nuclear space technology of direct energy conversion for terrestrial application". International Atomic Energy Agency, Vienna (Austria).
29. "Nuclear Reactors for Space".
30. "Radioisotope Thermoelectric Generators - Bellona".
31. "RIPPLE I – X and Large Source".
32. [https://www.irishlights.ie/tourism/our-lighthouses/rathlin-obirne.aspx Irish Lights- Rathlin O'Birne]
33. "The Actinide Research Quarterly: winter 94-95".
34. [https://netfiles.uiuc.edu/mragheb/www/NPRE%20402%20ME%20405%20Nuclear%20Power%20Engineering/Radioisotopes%20Power%20Production.pdf NPE chapter 3 Radioisotope Power Generation] {{webarchive. link. (18 December 2012)
35. Miotla, Dennis. (21 April 2008). "Assessment of Plutonium-238 Production Alternatives: Briefing for Nuclear Energy Advisory Committee".
36. (2020). "A Review on Thermoelectric Generators: Progress and Applications". Energies.
37. (24 September 1971). "Neutron Emission Rate Reduction in PuO{{sub". Mound Laboratory Document MLM-1844.
38. [https://www.forbes.com/sites/startswithabang/2018/12/13/nasa-doesnt-have-enough-nuclear-fuel-for-its-deep-space-missions/#47a2787d1c18 NASA Doesn't Have Enough Nuclear Fuel For Its Deep Space Missions]. Ethan Siegel, ''Forbes''. 13 December 2018.
39. [https://spacenews.com/plutonium-supply-for-nasa-missions-faces-long-term-challenges/ Plutonium supply for NASA missions faces long-term challenges]. Jeff Foust. ''Space News'', 10 October 2017.
40. (1968-01-01). "Properties of selected radioisotopes. A bibliography, part 1 - Unclassified literature". NASA.
41. "Polonium". Argonne National Laboratory.
42. (2019). "European Radioisotope Thermoelectric Generators (RTGs) and Radioisotope Heater Units (RHUs) for Space Science and Exploration". Space Science Reviews.
43. Nell Greenfield-Boyce, [https://www.npr.org/templates/story/story.php?storyId=113223613 Plutonium Shortage Could Stall Space Exploration], [[NPR]], 28 September 2009, retrieved 2 November 2010
44. Dr Major S. Chahal, [http://www.oosa.unvienna.org/pdf/pres/stsc2012/tech-18E.pdf], [[UK Space Agency]], 9 February 2012, retrieved 13 November 2014.
45. (3 May 2019). "UK scientists generate electricity from rare element to power future space missions".
46. "Voyager Mission Operations Status Reports". Voyager.jpl.nasa.gov web.
47. "NASA Celebrates 45 Years of Voyager 1, Enabled by Radioisotope Power". NASA.
48. (13 October 2016). "Spacecraft 'Nuclear Batteries' Could Get a Boost from New Materials". Jet Propulsion Laboratory.
49. "IAEA Bulletin Volume 48, No.1 – Remote Control: Decommissioning RTGs". Malgorzata K. Sneve.
50. "Report by Minister of Atomic Energy Alexander Rumyantsev at the IAEA conference "Security of Radioactive Sources," Vienna, Austria. March 11th 2003 (Internet Archive copy)".
51. [https://www.cnn.com/TECH/space/9908/16/cassini.flyby/ Nuclear-powered NASA craft to zoom by Earth on Tuesday], CNN news report, 16 August 1999
52. (20 January 2012). "Top 10 Space Age Radiation Incidents". listverse.com.
53. [http://saturn.jpl.nasa.gov/spacecraft/safety/fseis4.pdf Cassini Final Supplemental Environmental Impact Statement] {{webarchive. link. (29 September 2006 , Chapter 4, NASA, September 1997 ([http://saturn.jpl.nasa.gov/spacecraft/safety-eis.cfm Links to other chapters and associated documents] {{webarchive). link. (7 September 2006 ))
54. [http://saturn.jpl.nasa.gov/spacecraft/safety/fseisd.pdf Cassini Final Supplemental Environmental Impact Statement] {{webarchive. link. (29 September 2006 , Appendix D, Summary of tables of safety analysis results, Table D-1 on page D-4, see conditional probability column for GPHS-RTG)
55. [https://www.ieer.org/fctsheet/pu-props.html Physical, Nuclear, and Chemical, Properties of Plutonium], IEER Factsheet
56. [http://www.ead.anl.gov/pub/doc/tbl1-rad-rc.pdf Mortality and Morbidity Risk Coefficients for Selected Radionuclides], Argonne National Laboratory {{webarchive. link. (10 July 2007)
57. "Transit". Encyclopedia Astronautica.
58. "Energy Resources for Space Missions". Space Safety Magazine.
59. [http://nssdc.gsfc.nasa.gov/planetary/text/mars96_timeline.txt Mars 96 timeline], NASA
60. [[:File:SNAP-19C Mound Data Sheet.pdf]]
61. (2002). "Spies in the Himalayas: Secret Missions and Perilous Climbs". University Press of Kansas.
62. (13 December 2025). "How Did the C.I.A. Lose a Nuclear Device?".
63. Andy Mcloone. (2022-12-14). "The Soviet Union's Deadly Abandoned Nuclear Generators".