Skip to content
Surf Wiki
Save to docs
general/dielectrics

From Surf Wiki (app.surf) — the open knowledge base

Plasma pencil

Plasma pencil

Plasma pencil

The plasma pencil is a dielectric tube where two disk-shaped electrodes of about the same diameter as the tube are inserted, and are separated by a small gap. Each of the two electrodes is made of a thin copper ring attached to the surface of a centrally perforated dielectric disk. The plasma is ignited when nanoseconds-wide high voltage pulses at kHz repetition rate are applied between the two electrodes and a gas mixture (such as helium and oxygen) is flown through the holes of the electrodes. When a plasma is ignited in the gap between the electrodes, a plasma plume reaching lengths up to 12 cm is launched through the aperture of the outer electrode and into the surrounding room air. The cold plasma plume emitted by the plasma pencil can be used to kill bacteria without harming skin tissue.

Applications of the plasma pencil are in wound healing, killing of oral bacteria, and in controlled surface modification of heat-sensitive materials. The plasma pencil was invented by Mounir Laroussi, a plasma science professor at Old Dominion University, Norfolk, VA, USA.

Sources

Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about Plasma pencil — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report