Surf Wiki
Save to docs
general/electricity

From Surf Wiki (app.surf) — the open knowledge base

Node (circuits)

Region of an electrical circuit between two components

Region of an electrical circuit between two components

In electrical engineering, a node is any region or joining point on a circuit between two circuit elements. In circuit diagrams, connections are ideal wires with zero resistance. Whether "node" refers to a single point of junction or an entire equipotential region varies by the source.

"Node" is often used, especially in mesh analysis, to mean a principal node, which is distinct from the usage defined above. A principal node is a point in a circuit diagram where three or more connections meet. Principal nodes are important points of consideration in applying Kirchhoff's circuit laws, because conservation of current means current can split or combine at these points.

When clarification is needed, a region connecting only two circuit elements is referred to as a simple node, where there is no branching of current, while a point connecting three or more elements is a principal node. The full definition uses in this article encompasses both principal and simple nodes.

Details

According to Ohm's law, , the voltage V across any two points of a node with negligible resistance R is

:V = IR = I\cdot 0 = 0,

showing that the electric potential at every point of a node is the same.

There are some notable exceptions where the voltage difference is large enough to become significant:

  • High-precision resistance measurements using a Kelvin connection
  • The difference in voltage between ground and neutral, between the neutral wire and the ground in domestic AC power plugs and sockets, can be fatal. A properly installed electrical system connects them together at only one location, leading many people to the fatally incorrect conclusion that they are at "the same" voltage, or that the safety ground is "redundant and unnecessary"
  • The Seebeck effect and the Peltier effect
  • Joints involving aluminium wire

Dots used to mark nodes on a circuit diagram are sometimes referred to as meatballs.

References

References

  1. Smith, Ralph J. (1966), ''Circuits, Devices and Systems'', Chapter 2, John Wiley & Sons, Library of Congress Catalog Card No.: 66-17612
  2. Chen, Wai-Kai, ''The Electrical Engineering Handbook'' https://nibmehub.com/opac-service/pdf/read/The%20electrical%20engineering%20handbook%20by%20Wai%20Kai%20Chen.pdf, pg 5, Elsevier (2004), "A node is a junction point where the terminals of two or more elements are joined."
  3. "Circuit Nodes". Technology UK.
  4. "Analysing Electric Networks". mathonweb.com.
  5. "How Many Elements are Joined to a Principal Node?". testbook.com.
  6. Mansfield, Michael; O'Sullivan, Colm (2010), ''Understanding Physics (2nd edition)'', Chapter 14, page 359, John Wiley & Sons
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

electricity
Want to explore this topic further?

Ask Mako anything about Node (circuits) — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report