Skip to content
Surf Wiki
Save to docs
general/mercedes-benz-engines

From Surf Wiki (app.surf) — the open knowledge base

Mercedes-Benz M137 engine


FieldValue
nameMercedes-Benz M137 engine
imageMercedes-Benz M137.jpg
manufacturerMercedes-Benz
production1997–2002
configuration60° V12
valvetrainSOHC 3 valves x cyl.
fueltypeGasoline
fuelsystemFuel injection
displacement5786 cc
6258 cc
power270 kW
326 kW
specpower{{#expr:270/5.8 round 1}} kW per litre
{{#expr:326/6.3 round 1}} kW per litre
torque530 Nm
620 Nm
oilsystemWet sump
coolingsystemWater-cooled
compression10.0:1
bore84 mm
84.5 mm
stroke87 mm
93 mm
blockAluminium
headAluminium
predecessorMercedes-Benz M120
successorMercedes-Benz M275

6258 cc 326 kW {{#expr:326/6.3 round 1}} kW per litre 620 Nm 84.5 mm 93 mm The Mercedes-Benz M137 engine is a naturally aspirated, SOHC 60° V12 engine, with three valves per cylinder, 2 intake and 1 exhaust. It was built to replace the larger and heavier, yet more powerful, DOHC, four valves per cylinder, naturally aspirated, 6.0 L M120 V12 unit. The M137 was used briefly between 1998 and 2002 for the W220 S-Class (long wheelbase only) and C215 CL-Class. The architecture is similar to M112 and M113 engines, and is designed to match the overall dimensions of a V8 unit with undersquare internal measurements. The crankcase was cast in a lightweight alloy with "Silitec" (silicon/aluminium) cylinder liners to save weight. The M137 is 80 kg lighter than its predecessor and features cylinder deactivation technology. Both displacement variants have 10:1 compression ratio.

The M137 was replaced by the more powerful twin-turbocharged M275 engine.

E58

Mercedes introduced the M137.970 engine in its 5.8-litre form in S 600 and CL 600 models. The internal measurements of 84 by 87 mm of bore and stroke translates to a total displacement of 5786 cc. The resulting power output is 270 kW at 5500 rpm and torque figures of 530 Nm at 4250 rpm. From 1997 up to 2002, Mercedes produced 11,693 examples of the M137.970-powered S 600 and further 6,348 units of the coupé version, CL 600.

M137.970 applications:

  • 1997–2002 S 600 (W220)
  • 1998–2002 CL 600 (C215)

E63 AMG

In 2001 Mercedes and AMG introduced a series of special high-output models equipped with a larger-displacement M137.980 engine. Cars were available through AMG dealers only and sold to selected European and Asian customers. The 2001 S 63 AMG was produced in only 70 units. The 2001 CL 63 AMG exists in only 26 examples and the rarest of all is the 2002 G 63 AMG with only five units produced. The total displacement of 6258 cc is thanks to internal measurements of 84.5 by 93 mm. The resulting power output is 326 kW at 5500 rpm and torque figures of 620 Nm at 4400 rpm.

M137.980 applications:

  • 2001–2002 S 65 AMG (W220)
  • 2001–2002 CL 65 AMG (C215)
  • 2002 G 65 AMG (W463)

Reliability issues

The Mercedes M137 V12 engine, found in the 2000–2002 S600 and CL600 models, has a reputation for being one of the company's least reliable engines. It was notoriously short-lived due to several costly, major design flaws that can lead to catastrophic engine failure. Major known reliability issues Out-of-round cylinder walls: This is the most critical issue and can lead to excessive oil consumption. As the cylinder walls lose their shape, oil leaks past them and fouls the oxygen sensors and catalytic converters. Repairing this problem requires a new engine and can cost over $34,000 for parts alone. Failed ignition coil packs: When one coil pack fails, the entire bank must be replaced, resulting in an expensive repair. Oil fouling: The oil that leaks past the cylinder walls contaminates other engine components, including the eight downstream oxygen sensors ($1,600 to replace) and the catalytic converters ($8,000 to replace). PCV system problems: Known issues with the M137's Positive Crankcase Ventilation (PCV) system can cause oil to build up where the intake pipes and manifold meet, leading to leaks. Cylinder deactivation system failure: The M137's cylinder deactivation system was complex and had issues with its solenoid pack and oil pressure tubes. Expensive and complicated repairs: The overall complexity of the engine and its sensitive components means repairs are difficult and costly, even by Mercedes-Benz standards

References

References

  1. "Mercedes-Benz M137 engine (1998-2002)".
  2. "Mercedes-Benz M137 V12 engine".
  3. "S 600 long wheelbase / V 220 E 58, 2000- 2002".
  4. "CL 600 / C 215 E 58, 2000 - 2002".
  5. "CL 63 AMG / C 215 E 63, 2001 - 2002".
  6. "S 63 AMG long wheelbase / V 220 E 63, 2001 - 2002".
  7. "Silly Fast, Stupid Rare: The 2001 Mercedes-Benz CL63 AMG V12".
  8. "2003 Mercedes-Benz CL63 AMG".
  9. "Mercedes-Benz G 63 AMG Automatic, 444hp, 2002".
  10. [https://www.autopower.parts/mercedes-g-63-amg-v12-the-legendary-quot-cube-quot-produced-in-only-5-units.html Mercedes G 63 AMG V12: the legendary "cube", produced in only 5 units]
  11. "MERCEDES BENZ S 63 AMG (W220) 2001".
  12. "Mercedes S63 AMG W220".
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about Mercedes-Benz M137 engine — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report