Iron(III) chloride

Electronic and optical properties

All forms of ferric chloride are paramagnetic, owing to the presence of unpaired electrons residing in 3d orbitals. Although Fe(III) chloride can be octahedral or tetrahedral (or both, see structure section), all of these forms have five unpaired electrons, one per d-orbital. The high spin d5 electronic configuration requires that d-d electronic transitions are spin forbidden, in addition to violating the Laporte rule. This double forbidden-ness results in its solutions being only pale colored. Or, stated more technically, the optical transitions are non-intense. Aqueous ferric sulfate and ferric nitrate, which contain , are nearly colorless, whereas the chloride solutions are yellow. Thus, the chloride ligands significantly influence the optical properties of the iron center.

Structure

Iron(III) chloride can exist as an anhydrous material and a series of hydrates, which results in distinct structures.

Anhydrous

The anhydrous compound is a hygroscopic crystalline solid with a melting point of 307.6 °C. The colour depends on the viewing angle: by reflected light, the crystals appear dark green, but by transmitted light, they appear purple-red. Anhydrous iron(III) chloride has the structure, with octahedral Fe(III) centres interconnected by two-coordinate chloride ligands.

Iron(III) chloride has a relatively low melting point, and boils at around 315 °C. The vapor consists of the dimer , much like aluminium chloride. This dimer dissociates into the monomeric (with D3h point group molecular symmetry) at higher temperatures, in competition with its reversible decomposition to give iron(II) chloride and chlorine gas.

Hydrates

Ferric chloride form hydrates upon exposure to water, reflecting its Lewis acidity. All hydrates exhibit deliquescence, meaning that they become liquid by absorbing moisture from the air. Hydration invariably gives derivatives of aquo complexes with the formula . This cation can adopt either trans or cis stereochemistry, reflecting the relative location of the chloride ligands on the octahedral Fe center. Four hydrates have been characterized by X-ray crystallography: the dihydrate , the disesquihydrate , the trisesquihydrate , and finally the hexahydrate . These species differ with respect to the stereochemistry of the octahedral iron cation, the identity of the anions, and the presence or absence of water of crystallization.

Solution

Like the solid hydrates, aqueous solutions of ferric chloride also consist of the octahedral of unspecified stereochemistry. The polymeric species formed by the hydrolysis of ferric chlorides are key to the use of ferric chloride for water treatment.

In contrast to the complicated behavior of its aqueous solutions, solutions of iron(III) chloride in diethyl ether and tetrahydrofuran are well-behaved. Both ethers form 1:2 adducts of the general formula FeCl3(ether)2. In these complexes, the iron is pentacoordinate.

Preparation

Several hundred tons of anhydrous iron(III) chloride are produced annually. The principal method, called direct chlorination, uses scrap iron as a precursor: : The reaction is conducted at several hundred degrees such that the product is gaseous. Using excess chlorine guarantees that the intermediate ferrous chloride is converted to the ferric state.

Aqueous solutions of iron(III) chloride are also produced industrially from a number of iron precursors, including iron oxides: :

In complementary route, iron metal can be oxidized by hydrochloric acid followed by chlorination: : :

A number of variables apply to these processes, including the oxidation of iron by ferric chloride and the hydration of intermediates. Hydrates of iron(III) chloride do not readily yield anhydrous ferric chloride. Attempted thermal dehydration yields hydrochloric acid and iron oxychloride. In the laboratory, hydrated iron(III) chloride can be converted to the anhydrous form by treatment with thionyl chloride or trimethylsilyl chloride: : :

Reactions

Being high spin d5 electronic configuration iron(III) chlorides are labile, meaning that its Cl- and H2O ligands exchange rapidly with free chloride and water. In contrast to their kinetic lability, iron(III) chlorides are thermodynamically robust, as reflected by the vigorous methods applied to their synthesis, as described above.

Anhydrous FeCl₃

Aside from lability, which applies to anhydrous and hydrated forms, the reactivity of anhydrous ferric chloride reveals two trends: It is a Lewis acid and an oxidizing agent.

Reactions of anhydrous iron(III) chloride reflect its description as both oxophilic and a hard Lewis acid. Myriad manifestations of the oxophiliicty of iron(III) chloride are available. When heated with iron(III) oxide at 350 °C it reacts to give iron oxychloride: : Alkali metal alkoxides react to give the iron(III) alkoxide complexes. These products have more complicated structures than anhydrous iron(III) chloride. In the solid phase a variety of multinuclear complexes have been described for the nominal stoichiometric reaction between and sodium ethoxide: : Iron(III) chloride forms a 1:2 adduct with Lewis bases such as triphenylphosphine oxide; e.g., . The related 1:2 complex , has been crystallized from ether solution.

Iron(III) chloride also reacts with tetraethylammonium chloride to give the yellow salt of the tetrachloroferrate ion (). Similarly, combining FeCl3 with NaCl and KCl gives and , respectively.

In addition to these simple stoichiometric reactions, the Lewis acidity of ferric chloride enables its use in a variety of acid-catalyzed reactions as described below in the section on organic chemistry.

In terms of its being an oxidant, iron(III) chloride oxidizes iron powder to form iron(II) chloride via a comproportionation reaction: :

A traditional synthesis of anhydrous ferrous chloride is the reduction of FeCl3 with chlorobenzene: :

iron(III) chloride releases chlorine gas when heated above 160 °C, generating ferrous chloride: : To suppress this reaction, the preparation of iron(III) chloride requires an excess of chlorinating agent, as discussed above.

Hydrated FeCl₃

Unlike the anhydrous material, hydrated ferric chloride is not a particularly strong Lewis acid since water ligands have quenched the Lewis acidity by binding to Fe(III). Instead, it is a Brønsted-Lowry acid, as the hydrogen atoms on the water ligands become more acidic when the water ligands bond to Fe(III).

Like the anhydrous material, hydrated ferric chloride is oxophilic. For example, oxalate salts react rapidly with aqueous iron(III) chloride to give , known as ferrioxalate. Other carboxylate sources, e.g., citrate and tartrate, bind as well to give carboxylate complexes. The affinity of iron(III) for oxygen ligands was the basis of qualitative tests for phenols. Although superseded by spectroscopic methods, the ferric chloride test is a traditional colorimetric test. The affinity of iron(III) for phenols is exploited in the Trinder spot test.

Aqueous iron(III) chloride serves as a one-electron oxidant illustrated by its reaction with copper(I) chloride to give copper(II) chloride and iron(II) chloride. : This fundamental reaction is relevant to the use of ferric chloride solutions in etching copper.

Organometallic chemistry

The interaction of anhydrous iron(III) chloride with organolithium and organomagnesium compounds has been examined often. These studies are enabled because of the solubility of FeCl3 in ethereal solvents, which avoids the possibility of hydrolysis of the nucleophilic alkylating agents. Such studies may be relevant to the mechanism of FeCl3-catalyzed cross-coupling reactions. The isolation of organoiron(III) intermediates requires low-temperature reactions, lest the [FeR4]− intermediates degrade. Using methylmagnesium bromide as the alkylation agent, salts of Fe(CH3)4]− have been isolated. Illustrating the sensitivity of these reactions, methyl lithium reacts with iron(III) chloride to give lithium tetrachloroferrate(II) : : : To a significant extent, iron(III) acetylacetonate and related beta-diketonate complexes are more widely used than FeCl3 as ether-soluble sources of ferric ion. These diketonate complexes have the advantages that they do not form hydrates, unlike iron(III) chloride, and they are more soluble in relevant solvents. Cyclopentadienyl magnesium bromide undergoes a complex reaction with iron(III) chloride, resulting in ferrocene: : This conversion, although not of practical value, was important in the history of organometallic chemistry where ferrocene is emblematic of the field.

Uses

Water treatment

The largest applications of iron(III) chloride are sewage treatment and drinking water production. By forming highly dispersed networks of Fe-O-Fe containing materials, ferric chlorides serve as coagulant and flocculants. In this application, an aqueous solution of is treated with base to form a floc of iron(III) hydroxide (), also formulated as FeO(OH) (ferrihydrite). This floc facilitates the separation of suspended materials, clarifying the water.

Iron(III) chloride is also used to remove soluble phosphate from wastewater. Iron(III) phosphate is insoluble and thus precipitates as a solid. One potential advantage of its use in water treatment, is that the ferric ion oxidizes (deodorizes) hydrogen sulfide.

Etching and metal cleaning

It is also used as a leaching agent in chloride hydrometallurgy, for example in the production of Si from FeSi (Silgrain process by Elkem).

In another commercial application, a solution of iron(III) chloride is useful for etching copper according to the following equation: : The soluble copper(II) chloride is rinsed away, leaving a copper pattern. This chemistry is used in the production of printed circuit boards (PCB).

Iron(III) chloride is used in many other hobbies involving metallic objects.

Organic chemistry

In industry, iron(III) chloride is used as a catalyst for the reaction of ethylene with chlorine, forming ethylene dichloride (1,2-dichloroethane): : Ethylene dichloride is a commodity chemical, which is mainly used for the industrial production of vinyl chloride, the monomer for making PVC.

Illustrating it use as a Lewis acid, iron(III) chloride catalyses electrophilic aromatic substitution and chlorinations. In this role, its function is similar to that of aluminium chloride. In some cases, mixtures of the two are used.

Organic synthesis research

Although iron(III) chlorides are seldom used in practical organic synthesis, they have received considerable attention as reagents because they are inexpensive, earth abundant, and relatively nontoxic. Many experiments probe both its redox activity and its Lewis acidity.

3-Alkylthiophenes are polymerized to polythiophenes upon treatment with ferric chloride. Iron(III) chloride has been shown to promote C-C coupling reaction.

Several reagents have been developed based on supported iron(III) chloride. On silica gel, the anhydrous salt has been applied to certain dehydration and pinacol-type rearrangement reactions. A similar reagent but moistened induces hydrolysis or epimerization reactions. On alumina, ferric chloride has been shown to accelerate ene reactions.

When pretreated with sodium hydride, iron(III) chloride gives a hydride reducing agent that convert alkenes and ketones into alkanes and alcohols, respectively.

Histology

• Used in an animal thrombosis model.
• --Iron(III) chloride is a component of useful stains, such as Carnoy's solution, a histological fixative with many applications. Also, it is used to prepare Verhoeff's stain.

Natural occurrence

Like many metal halides, naturally occurs as a trace mineral. The rare mineral molysite is usually associated with volcanoes and fumaroles.

-based aerosol are produced by a reaction between iron-rich dust and hydrochloric acid from sea salt. This iron salt aerosol causes about 1–5% of naturally occurring oxidization of methane and is thought to have a range of cooling effects; thus, it has been proposed as a catalyst for Atmospheric Methane Removal.

The clouds of Venus are hypothesized to contain approximately 1% dissolved in sulfuric acid.

Safety

Iron(III) chlorides are widely used in the treatment of drinking water, so they pose few problems as poisons, at low concentrations. Nonetheless, anhydrous iron(III) chloride, as well as concentrated aqueous solution, is highly corrosive, and must be handled using proper protective equipment.

Notes

References

References

1. {{RubberBible92nd
2. {{RubberBible92nd
3. (1989). "Structure refinement of an FeCl₃ crystal using a thin plate sample". [[Journal of Applied Crystallography.
4. {{GHS class NZ
5. [http://webcomm.bcd.tamhsc.edu/bcdfacilities/msds9.html Various suppliers], collated by the Baylor College of Dentistry, [[Texas A&M University]]. (accessed 2010-09-19)
6. {{GHS class JP
7. {{PGCH. 0346
8. (2012). "Inorganic Chemistry". Prentice Hall.
9. Simon A. Cotton. (2018). "Iron(III) Chloride and Its Coordination Chemistry". Journal of Coordination Chemistry.
10. (2001). "Inorganic Chemistry". Academic Press.
11. (1967). "Crystal Structure of Ferric Chloride Hexahydrate". The Journal of Chemical Physics.
12. (1950). "Inorganic Syntheses".
13. (1963). "Handbook of Preparative Inorganic Chemistry, 2nd Ed.". Academic Press.
14. (1990). "Inorganic Syntheses".
15. (1992). "Inorganic Syntheses".
16. (2002). "The Chemistry of Metal Alkoxides". Springer Science.
17. (2001). "Alkoxo and aryloxo derivatives of metals". Academic Press.
18. (2003). "Alkoxo-Verbindungen des dreiwertigen Eisen: Synthese und Charakterisierung von [Fe2(Ot ''Bu'')6], [Fe2Cl2(Ot ''Bu'')4], [Fe2Cl4(Ot ''Bu'')2] und [N(n ''Bu'')4]2[Fe6OCl6(OMe)12]". Zeitschrift für anorganische und allgemeine Chemie.
19. (1961). "The Reaction of Ferric Chloride with Sodium and Potassium Chlorides". J. Phys. Chem..
20. P. Kovacic and N. O. Brace. (1960). "Inorganic Syntheses".
21. (1989). "Vogel's Textbook of Practical Organic Chemistry". [[Longman]]/[[John Wiley & Sons.
22. (1995). "Urine Trinder Spot Test: A Rapid Salicylate Screen for the Emergency Department". Annals of Emergency Medicine.
23. (2016). "Recent Advances in Iron-Catalysed Cross Coupling Reactions and Their Mechanistic Underpinning". Inorganic Chemistry Frontiers.
24. (2019). "Synthesis and Characterization of a Sterically Encumbered Homoleptic Tetraalkyliron(III) Ferrate Complex". Polyhedron.
25. (1972). "Über die Bildung von Lithiumtetrachloroferrat(II) Li₂FeCl₄ bei der Umsetzung von Eisen(III)-chlorid mit Lithiummethyl (1:1) in ätherischer Lösung". [[Zeitschrift für anorganische und allgemeine Chemie.
26. (1951). "A New Type of Organo-Iron Compound". [[Nature (journal).
27. (2001). "Ferrocene—how it all began". [[Journal of Organometallic Chemistry]].
28. (2007). "Water Treatment Chemicals". [[Akzo Nobel.
29. (2000). "Ullmann's Encyclopedia of Industrial Chemistry".
30. (June 2006). "Phosphorus Treatment and Removal Technologies". [[Minnesota Pollution Control Agency]].
31. (2021). "Ferric chloride for odour control: studies from wastewater treatment plants in India". Water Practice and Technology.
32. (2006). "A study on the acidified ferric chloride leaching of a complex (Cu–Ni–Co–Fe) matte". Separation and Purification Technology.
33. (2006). "Validation of a compartmental population balance model of an industrial leaching process: The Silgrain process". [[Chemical Engineering Science.
34. (1997). "Chemistry of the Elements". [[Butterworth-Heinemann]].
35. "Safer Printmaking—Intaglio".
36. (November 1, 2002). "Etching Iron Meteorites". Meteorite Times.
37. "A message about mirror coating and recoating". Lockwood Custom Optics.
38. (13 December 2023). "Buffalo Nickel No Date Value: How Much Is It Worth Today?".
39. (2019). "Metallography in Archaeology and Art". Springer.
40. (2014). "Ullmann's Encyclopedia of Industrial Chemistry".
41. "Toxic Substances – 1,2-Dichloroethane".
42. (1932). "Mixed Catalysis in the Friedel and Crafts Reaction. The Yields in Typical Reactions using Ferric Chloride–Aluminum Chloride Mixtures as Catalysts". J. Am. Chem. Soc..
43. Louis F. Fieser. (1937). "1,2-Naphthoquinone". Organic Syntheses.
44. (2019). "Molecular Design, Synthetic Strategies, and Applications of Cationic Polythiophenes". Chemical Reviews.
45. (2021). "Carbonyl–Olefin Metathesis". Chemical Reviews.
46. (2001). "Encyclopedia of Reagents for Organic Synthesis".
47. (2001). "Encyclopedia of Reagents for Organic Synthesis".
48. (2002). "Mild and efficient reduction of azides to amines: synthesis of fused [2,1-''b'']quinazolines". [[Tetrahedron Letters.
49. (2001). "Encyclopedia of Reagents for Organic Synthesis".
50. (2006). "Transendothelial migration of ferric ion in FeCl₃ injured murine common carotid artery". [[Thrombosis Research.
51. (1990). "Histotechnology – A Self-Instructional Text". ASCP Press.
52. "Molysite". Mindat.
53. (21 March 2011). "IMA list of Minerals".
54. (January 13, 2017). "Climate engineering by mimicking natural dust climate control: the iron salt aerosol method". Earth System Dynamics.
55. (1981). "Chemical composition of the atmosphere of Venus". Nature.
56. Krasnopolsky, Vladimir A.. (2006). "Chemical composition of Venus atmosphere and clouds: Some unsolved problems". [[Planetary and Space Science]].
57. (2006). "Encyclopedia of Reagents for Organic Synthesis".