From Surf Wiki (app.surf) — the open knowledge base
Inglefield clip
.jpg)

The Inglefield clip (also known as a sister clip{{cite book |url-status = dead
Each clip resembles a link of chain, with a split through one side. The edges of this split are chamfered, so that the clips can be engaged or disengaged, but only if they are carefully aligned by hand. When pulled tight, the links are securely fastened. There are no moving parts to the link, although some have additional swivel pieces.
They can be made of any durable material; commonly brass, bronze, stainless steel or plastic. The clips come in two basic types: 'standard' with the halyard attached directly to the clip, and 'swivel' which incorporates a rotational connector so that the halyard can rotate without affecting the flag. In the Royal Navy a flag or ensign normally has both types of clip, one at each end of the heading. Some flags have the top clip sewn directly onto the heading rather than a rope running through it. This allows these flags to be flown 'tight-up' against the top of the mast, gaff or yard arm.
History
Lieutenant Edward Fitzmaurice InglefieldLater Rear Admiral Sir Edward Inglefield KBE invented these clips for attaching signalling flags whilst serving in HMS Melita in the early 1890s. The first set of prototype clips was made up in the Malta Dockyard and by 1895 Inglefield clips were standard issue to the British Royal Navy.
Notes
References
References
- (1998). "H.M.S. Melita : the only British warship built in Malta". Melitensia books.
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Inglefield clip — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report