IEC 60068

Tests

Some of the tests have been withdrawn, replaced, or merged with other documents or standards.

IEC 60068-2-1 - Test A: Cold

IEC 60068-2-2 - Test B: Dry heat

IEC 60068-2-5 - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering

IEC 60068-2-6 - Test Fc: Vibration (sinusoidal)

IEC 60068-2-7 - Test Ga and guidance: Acceleration, steady state

IEC 60068-2-10 - Test J and guidance: Mould growth

IEC 60068-2-11 - Test Ka: Salt mist

IEC 60068-2-13 - Test M: Low air pressure

IEC 60068-2-14 - Test N: Change of temperature

IEC 60068-2-17 - Test Q: Sealing

IEC 60068-2-18 - Test R and guidance: Water

IEC 60068-2-20 - Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads

IEC 60068-2-21 - Test U: Robustness of terminations and integral mounting devices

IEC 60068-2-27 - Test Ea and guidance: Shock

IEC 60068-2-30 - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

IEC 60068-2-31 - Test Ec: Rough handling shocks, primarily for equipment-type specimens

IEC 60068-2-32 - Test Ed: Free Fall (withdrawn)

IEC 60068-2-38 - Test Z/AD: Composite temperature/humidity cyclic test

IEC 60068-2-39 - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests

IEC 60068-2-42 - Test Kc: Sulphur dioxide test for contacts and connections

IEC 60068-2-43 - Test Kd: Hydrogen sulphide test for contacts and connections

IEC 60068-2-45 - Test XA and guidance: Immersion in cleaning solvents

IEC 60068-2-46 - Guidance to test Kd: Hydrogen sulphide test for contacts and connections

IEC 60068-2-47 - Mounting of specimens for vibration, impact and similar dynamic tests

IEC 60068-2-49 - Guidance to test Kc: Sulphur dioxide test for contacts and connections

IEC 60068-2-52 - Test Kb: Salt mist, cyclic (sodium chloride solution)

IEC 60068-2-53 - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests

IEC 60068-2-55 - Test Ee and guidance - Loose cargo testing including bounce

IEC 60068-2-57 - Test Ff: Vibration - Time-history and sine-beat method

IEC 60068-2-58 - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

IEC 60068-2-60 - Test Ke: Flowing mixed gas corrosion test

IEC 60068-2-61 - Test Z/ABDM:Climatic sequence

IEC 60068-2-64 - Test Fh: Vibration, broadband random and guidance

IEC 60068-2-65 - Test Fg: Vibration - Acoustically induced method

IEC 60068-2-66 - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

IEC 60068-2-67 - Test Cy: Damp heat, steady state, accelerated test primarily intended for components

IEC 60068-2-68 - Test L: Dust and sand

IEC 60068-2-69 - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method

IEC 60068-2-70 - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands

IEC 60068-2-74 - Test Xc: Fluid contamination

IEC 60068-2-75 - Test Eh: Hammer tests

IEC 60068-2-77 - Test 77: Body strength and impact shock

IEC 60068-2-78 - Test Cab: Damp heat, steady state

IEC 60068-2-80 - Test Fi: Vibration - Mixed mode

IEC 60068-2-81 - Test Ei: Shock - Shock response spectrum synthesis

IEC 60068-2-82 - Test Xw1: Whisker test methods for components and parts used in electronic assemblies

IEC 60068-2-83 - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste

IEC 60068-2-85 - Test Fj: Vibration - Long time history replication

Supporting documentation and guidance

IEC 60068-3-1 - Cold and dry heat tests

IEC 60068-3-3 - Seismic test methods for equipment

IEC 60068-3-4 - Damp heat tests

IEC 60068-3-5 - Confirmation of the performance of temperature chambers

IEC 60068-3-6 - Confirmation of the performance of temperature/ humidity chambers

IEC 60068-3-7 - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)

IEC 60068-3-8 - Selecting amongst vibration tests

IEC 60068-3-11 - Calculation of uncertainty of conditions in climatic test chambers

IEC TR 60068-3-12 - Method to evaluate a possible lead-free solder reflow temperature profile

IEC 60068-3-13 - Supporting documentation and guidance on Test T - Soldering

Other supporting documentation and guidance

IEC 60068-5-2 - Guide to drafting of test methods - Terms and definitions

References

References

1. "IEC 60068-2 {{!}} Environmental Testing of Electronic Equipment »".
2. "IEC 60068-1".
3. "IEC 60068-2 Bundled Tests".
4. "IEC 60068-2-1".
5. "IEC 60068-2-2".
6. "IEC 60068-2-32 (withdrawn)".
7. "IEC 60068-3-12".
8. "IEC 60068-5-2".