Floating dock (jetty)

Braby pontoon

'Braby pontoon' was the name given to a type of floating dock used by flying boats in Australia and New Zealand from 1939 to the 1950s. Frederick Braby and Company was a British manufacturer of tanks and silos, Bailey bridges and pontoons. The Braby name was also attached to the general type of pontoon made with ship tanks, whether or not they were manufactured by Frederick Braby and Company. Two 1939 descriptions of a Braby pontoon in Auckland stated:A new type of floating jetty will he used in Auckland for the berthing of the flying-boats. Mr. Turnill stated this morning that this type is known as the "Braby pontoon", and it has been used previously only at Southampton. It has been well tested there and has been found to be most satisfactory. It consists of two twin sections joined in an arc underneath the water.andShaped like a U, the pontoon resembles a miniature floating dock, and consists of two parallel decks joined by a submerged framework. Tanks give the necessary buoyancy. When the flying-boat has landed, it is warped into position by the ground crew, and is drawn tail-first into the pontoon, coming to rest with the hull between the two sections of decking and above the submerged frame. Inflated buffers on the inner edge of the decking prevent the delicate hull from being damaged.A Braby pontoon constructed at Evans Bay in Wellington, New Zealand in 1951 consisted of 124 large square steel tanks connected together and ballasted with water and oil. The pontoon was U-shaped, 110 ft long and 74 ft wide. Flying boats were winched tail-first into the U so that passengers could step onto the pontoon dock. File:Flying boat base, Evans Bay.jpg|A Braby pontoon at Evans Bay, Wellington, New Zealand. File:Mohonk Mountain House 2011 Boat Dock Against Reflection of Cliff FRD 3029.jpg|A floating dock at Mohonk Mountain House File:16 07 231 florence marina.jpg|A floating dock at Florence Marina State Park File:Floating dock at North Haven.jpg|A floating dock at a private marina. The vertical "spud" only anchors the dock sections in place, and does not provide structural support for loads upon the dock. File:PontoonHuntleysPoint.jpg|A pontoon in Sydney

References

References

1. James F. Wilson. (2010). "Passive Restraint System for Floating Docks with Large Water-Level Excursions". Practice Periodical on Structural Design and Construction.
2. (11 May 1939). "Tasman Airway". New Zealand Herald.
3. (20 June 1951). "£10,000 Repairs for Flying Boat". [[The Courier-mail]].
4. (21 September 1966). "Braby's pick Sales Chief". Western Daily Press.
5. Pearson, Michael. (1992). "From Ship to the Bush: Ship Tanks in Australia". Australasian Historical Archaeology.
6. The Braby pontoon built at Wellington, New Zealand in 1951 was constructed locally from re-used tanks.
7. (23 August 1951). "£16,000 berth for Solent". Evening Post.
8. (16 March 1939). "How soon now?". Auckland Star.
9. (25 September 1951). "Flying boat pontoon". Press.
10. (2 February 1957). "Big moving contract". Press.