From Surf Wiki (app.surf) — the open knowledge base

Fillet (mechanics)

Rounding of an interior or exterior corner

In mechanical engineering, a fillet ( ) is a rounding of an interior or exterior corner of a part. An interior or exterior corner, with an angle or type of bevel, is called a "chamfer". Fillet geometry, when on an interior corner is a line of concave function, whereas a fillet on an exterior corner is a line of convex function (in these cases, fillets are typically referred to as rounds). Fillets commonly appear on welded, soldered, or brazed joints.

Depending on a geometric modelling kernel different CAD software products may provide different fillet functionality. Usually fillets can be quickly designed onto parts using 3D solid modeling engineering by picking edges of interest and invoking the function. Smooth edges connecting two simple flat features are generally simple for a computer to create and fast for a human user to specify. Once these features are included in the CAD design of a part, they are often manufactured automatically using computer-numerical control.

Applications

Stress concentration is a problem of load-bearing mechanical parts which is reduced by employing fillets on points and lines of expected high stress. The fillets distribute the stress over a broader area and effectively make the parts more durable and capable of bearing larger loads.
For considerations in aerodynamics, fillets are employed to reduce interference drag where aircraft components such as wings, struts, and other surfaces meet one another.
For manufacturing, concave corners are sometimes filleted to allow the use of round-tipped end mills to cut out an area of a material. This has a cycle time benefit if the round mill is simultaneously being used to mill complex curved surfaces.
Radii are used to eliminate sharp edges that can be easily damaged or that can cause injury when the part is handled.Visualization, modeling, and graphics for engineering design By Dennis Kenmon Lieu, Sheryl Sorby, Page 6-31

Terminology

Terminology for rounding on a mechanical part

Different design packages use different names for the same operations.

Autodesk Inventor, AutoCAD, Rhino3D, CATIA, FreeCAD, Solidworks and Vectorworks refer to both concave and convex rounded edges as fillets, while referring to angled cuts of edges and concave corners as chamfers.
CADKEY and Unigraphics refer to concave and convex rounded edges as blends.
PTC Creo Elements/Pro (formerly Pro/Engineer) refers to rounded edges simply as rounds.

Other 3D solid modeling software programs outside of engineering, such as gameSpace, have similar functions.

Notes

Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

mechanical-engineering

Want to explore this topic further?

Ask Mako anything about Fillet (mechanics) — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report