From Surf Wiki (app.surf) — the open knowledge base

DS80C390

8051-compatible microcontroller with dual CAN 2.0B controllers

The DS80C390 is a microcontroller, introduced by Dallas Semiconductor (later part of Maxim Integrated Products, now part of Analog Devices), whose architecture is derived from that of the Intel MCS-51 (aka. 8051) processor series. It contains a code memory address space of twenty-two bits. It also contains two Controller Area Network (CAN) controllers and a 32-bit integer coprocessor.

The open-source Small Device C Compiler (SDCC) supports the processor. It was used in the initial version of the Tiny Internet Interface (TINI) processor module where it was superseded by the DS80C400, a processor that also incorporates an Ethernet port.

Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

microcontrollers

Want to explore this topic further?

Ask Mako anything about DS80C390 — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report