Surf Wiki
Save to docs
general/leathermaking

From Surf Wiki (app.surf) — the open knowledge base

Deliming

Process in leather processing

Process in leather processing

The deliming operation in leather processing is a drum/paddle or pit based operation where two main objectives are met:{{citation

  • Removal of alkali from the pelt and the consequent deswelling of the fibres.
  • Lowering of the liquor pH to the values used in the bating process.

Deliming operations of cattle hides usually last two hours and are generally associated with the alkaline phase of beamhouse operations. The progress of deliming in pelts is monitored by the checking of pH values of process liquors and in the cutting of a pelt cross-section. Phenolphthalein is used to monitor deliming pelt cross-sectional progress.

Removal of pelt alkali and deswelling

  • As an acid is added it lowers the pH value of the internal pelt solution. This neutralizes the solution alkalinity. The lowering of the pH results in rapid protonation of the collagen basic groups.

Lowering of liquor pH

  • The acid present in the deliming agents neutralizes the process liquor pH. Typical values after effective, thorough deliming will range from 6 to 9. Ammonium salt deliming pH values should be pH 8 to 9.

Deliming types

The deliming process can be done with acids that can be rapid in their pH adjustment. Buffering salts like ammonium salts predominated the 20th century. Ammonium sulfate and ammonium chloride can be used as deliming agents and they follow the following chemistry:

:(NH4)SO4 → (ammonium) + (sulfate)

The ammonium ion is then free to penetrate the pelt cross-section and further ionise to act as an acid:

: (ammonium) + H2O → NH3 (ammonia) + H3O+ (hydronium)

The protons can then serve two functions, namely to protonate basic groups of the collagen and neutralize solution alkali chemicals.

Other weak acids can be used such as boric acid, acetic acid, formic acid, lactic acid, phosphoric acid and carbonic acid. Carbonic acid is used in a deliming process called carbon dioxide deliming. Strong acids such as hydrochloric acid and sulfuric acid can also be used but their use is limited.

References

Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

leathermaking
Want to explore this topic further?

Ask Mako anything about Deliming — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report