From Surf Wiki (app.surf) — the open knowledge base
Cotton module builder
Machine used in the harvest and processing of cotton
Machine used in the harvest and processing of cotton

,US_wed01jan2014-1557h.jpg)
The cotton module builder is a machine used in the harvest and processing of cotton. The module builder has helped to solve a logistical bottleneck by allowing cotton to be harvested quickly and compressed into large modules which are then covered and temporarily stored at the edge of the field. The modules are later loaded onto trucks and transported to a cotton gin for processing.
History
In 1971 the first experimental cotton module builder was designed and built by a team led by Professor Lambert H. Wilkes at Texas A&M University in cooperation with Cotton Incorporated. Cotton module builders have been in use since 1972. In the US today more than 90% of harvested cotton is compacted with module builders. Module builders are also widely used in other countries where cotton is mechanically harvested.
In 2002 the ASABE (American Society of Agricultural and Biological Engineers) dedicated the cotton module builder as an historic landmark of agricultural engineering, naming it "one of the top three inventions in mechanized cotton production."
Module Building
Though many varieties of module builders and even combined module builder pickers exist, a typical module builder is a large trailer that is moved by a tractor and remains stationary when used. The wheels are often hydraulically retracted when the module builder is operational. A module builder is about 9 meters (30 ft.) long, 4 meters (12 ft.) high and 3 meters (10 ft.) wide. It works similarly to a garbage truck. When loading the cotton from the cotton picker into the module builder it should be distributed as evenly as possible. After loading the cotton into the module builder, a hydraulic compactor moves up and down along the length of the machine. This process is repeated every time that a cotton picker is unloaded into the module builder until a module is built up and discharged through the tailgate of the machine. The module is stored on the field and the module builder is moved into a new position to build up another module. The weight of one module is about 10 metric tons.
References
References
- [http://www.cottoninc.com/CottonGrowerArticles/ModuleBuilder/ The Module Builder] {{webarchive. link. (2007-08-20)
- [http://www.cotton.org/tech/quality/just-build-it.cfm Just Build It: Seed-Cotton Storage & Handling in Modules]
- [http://agnewsarchive.tamu.edu/dailynews/stories/AGEN/May2102a.htm Cotton Module Builder To Be Dedicated As Historical Landmark] {{webarchive. link. (2010-07-12)
- "Seed Cotton Handling Systems".
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Cotton module builder — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report