Skip to content
Surf Wiki
Save to docs
general/experimental-and-prototype-high-speed-trains

From Surf Wiki (app.surf) — the open knowledge base

Class 1000 Shinkansen

Two prototype Japanese Shinkansen trains


Two prototype Japanese Shinkansen trains

FieldValue
nameClass 1000
imageClass 1000 Shinkansen Photograph.png
captionClass 1000 Shinkansen set A
service1962–1976
manufacturer{{hlist
yearconstruction1961–1962
yearscrapped1975–1976
numberbuilt6 vehicles (2 sets)
numberpreserved0
formation2 or 4 cars per trainset
fleetnumbersA/B set
operatorJapanese National Railways
carbodySteel
carlength25 m
width3.38 m
doors2 externally opening sliding doors per side
electricsystem
collectionmethodPantograph
gauge

| Hitachi | Kawasaki Sharyo | Kisha Seizo | Kinki Sharyo | Nippon Sharyo

Class 1000 was the classification given to the two prototype Japanese Shinkansen trains built for high-speed testing ahead of the opening of the Tōkaidō Shinkansen in 1964.

Formations

Set A

  1. 1001 (Mc) built by Kisha Seizo, seating capacity 56 (actual 16), DT9002 bogies
  2. 1002 (MDc) built by Nippon Sharyo, seating capacity 80, DT9001 bogies

Set B

  1. 1003 (Mc) built by Hitachi, seating capacity 70, DT9006 bogies
  2. 1004 (MD) built by Hitachi, seating capacity 100, DT9004 bogies
  3. 1005 (M) built by Kawasaki Sharyo, seating capacity 80, DT9005 bogies
  4. 1006 (MDc) built by Kinki Sharyo, seating capacity 80, DT9003 bogies

Construction

All vehicles were of welded steel construction, and had rounded cab windows except for car 1006 which had an angular design which was ultimately used on the production 0 series vehicles. Due to differing vehicle construction, car 1004 in set B had unusual elongated hexagonal windows. Among the features not continued on the production 0 series units were externally sliding doors, and a translucent nose section illuminated from inside by fifteen 20 W fluorescent tubes. Cars 1002, 1004 and 1006 were fitted with auxiliary pantographs adjacent to the main pantographs.

Interior

Internally, each car featured a different seating configuration for assessment, as described below.

Car 1001 featured two rows each of rotating unidirectional 1st class and 2nd class seating arranged 2+2 abreast. These seats were the same as those used on 151 series limited express EMUs.

Car 1002 featured 2nd class seating arranged in back-to-back seating bays, 2+3 abreast with armrests. Seating pitch was 1900 mm.

Car 1003 featured 2nd class flip-over reversible seating, 2+3 abreast with a seating pitch of 950 mm. This was the design ultimately used on the first production 0 series sets.

Car 1004 featured 2nd class flip-over reversible seating, 2+3 abreast with a seating pitch of 950 mm. The design differed from that used in car 1003 in that the seat backs were single-sided.

Car 1005 featured second-class seating arranged in 1300 mm wide back-to-back express-style seating bays, 3+3 with no armrests. Seating pitch was 1900 mm.

Car 1006 featured second-class seating arranged in back-to-back seating bays, 2+3 abreast with armrests. Seating pitch was 1900 mm.

Cars 1001, 1003, and 1005 had toilets and washbasins, Japanese and western style in cars 1001 and 1003, and both Japanese style in car 1005. Urinals were also provided – the first time on general Japanese trains other than dedicated school-trip EMUs.

History

The first car to be built, 1001, was delivered on 16 April 1962 from Tokyo Kisha's factory in Kōtō, Tokyo, and transferred by road and rail to Nippon Sharyo's Warabi factory in Kawaguchi, Saitama on 17 April. The two-car set A was then unveiled to the press at Nippon Sharyo on 25 April 1962.

Test running was performed on the 32 km "model track" test section between Kamonomiya in Odawara and Ayase in Kanagawa Prefecture from 26 June 1962. A speed of 190 km/h was first recorded on 27 October 1962 by set B, breaking the previous record of 175 km/h set by the narrow-gauge KuMoYa 93 test train on 21 November 1960. A speed of 200 km/h was first recorded on 31 October 1962 by set B, 210 km/h was reached on 20 December 1962, 243 km/h was recorded on 19 March 1963, and on 30 March 1963, set B recorded a world speed record of 256 km/h.

With the start of test-running and trial service on the Tōkaidō Shinkansen between Tokyo and Osaka in June 1964, set A was reclassified asa Class 941 emergency relief train (cars 941-1 and 941-2), and set B as a Class 922 track and overhead wire inspection train (set T1) (cars 922-1–4). The Class 941 remained out of use at Osaka Depot, and the Class 922 set was active until the new Class 922/10 set, T2, was delivered in 1974.

All six prototype cars were cut up at Hamamatsu Works between 1975 and 1976, being used to test the cutting-up facilities ahead of the first batch of 360 0 series cars due for withdrawal.

References

References

  1. "". (December 2005). Kotsu Shimbunsha
  2. {{cite magazine. (June 1962). "". Japan Railfan Club
  3. {{cite magazine. (June 1962). "". Japan Railfan Club
  4. Suda. Hiroshi. "". JTB Can Books. (2000)
  5. {{cite magazine. Asahara. Nobuhiko. (September 2008). "". Neko Publishing Co., Ltd.
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about Class 1000 Shinkansen — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report