Chloral

Production

Chloral was first prepared, and named, by the German chemist Justus von Liebig in 1832.See:

• pp. 189–191 "Wirkung des Chlors auf Alkohol" [Reaction of Chlorine with alcohol [i.e., ethanol]]; pp. 191–194 "Darstellung des Chloral[s]" [Preparation of chloral]; pp. 195–198 "Eigenschaften des Chlorals" [Properties of chloral]. Liebig named chloral on p. 191. From p. 191: "Ich werde in dem Folgenden zeigen, dass bei einer vollkommnen Zersetzung des Alkohols das Chlor den Wasserstoff desselben abscheidet und diesen Wasserstoff ersetzt; es entsteht eine neue eigenthümliche Verbindung von Chlor, Kohlenstoff und Sauerstoff, welche ich, indem ich keinen zweckmässigeren Namen weiss, vorläufig Chloral nenne. Dieser Name ist dem Worte Aethal nachgebildet." (In the following, I will show that during a complete breakdown of ethanol, chlorine removes its [i.e., ethanol's] hydrogen and replaces this hydrogen; there arises a strange new compound of chlorine, carbon, and oxygen, which I — as I know no more appropriate name — provisionally name "chloral". This name is patterned after the word Aethal [i.e., ethyl].)
• Reprinted in: pp. 250-252 "Wirkung des Chlors auf Alkohol" [Reaction of Chlorine with alcohol [i.e., ethanol]]; pp. 252–255 "Darstellung des Chloral[s]" [Preparation of chloral]; pp. 255–259 "Eigenschaften des Chlorals" [Properties of chloral].
• Liebig treated anhydrous ethanol with dry chlorine gas.

Chloral is produced commercially by the chlorination of acetaldehyde in the presence of hydrochloric acid, producing chloral hydrate. Ethanol can also be used as a feedstock. This reaction is catalyzed by antimony trichloride: :H3CCHO + 3 Cl2 + H2O → Cl3CCH(OH)2 + 3 HCl

The chloral hydrate is distilled from the reaction mixture. The distillate is then dehydrated with concentrated sulfuric acid, after which the heavier acid layer (containing the water) is drawn off:

:Cl3CCH(OH)2 → Cl3CCHO + H2O

The resulting product is purified by fractional distillation. Small amounts of chloral hydrate occur in some chlorinated water.

Key reactions

Chloral tends to form adducts with water (to give chloral hydrate) and alcohols.

Aside from its tendency to hydrate, chloral is notable as a building block in the synthesis of DDT. For this purpose, chloral is treated with chlorobenzene in the presence of a catalytic amount of sulfuric acid: : Cl3CCHO + 2 C6H5Cl → Cl3CCH(C6H4Cl)2 + H2O This reaction was described by Othmar Zeidler in 1874.{{cite journal | trans-title = Compounds of chloral with bromo- and chlorobenzene

Treating chloral with sodium hydroxide gives chloroform Cl3CH and sodium formate HCOONa. : Cl3CCHO + NaOH → Cl3CH + HCOONa

Chloral is easily reduced to trichloroethanol, which is produced in the body from chloral.

Toxicity

Chloral and chloral hydrate have the same properties biologically since the former hydrates rapidly. Chloral hydrate was routinely administered to patients on the gram scale with no lasting effects. Prolonged exposure to the vapors is toxic with a LC50 for 4-hour exposure of 440 mg/m3.

References

References

1. (1975). "Chemistry of Chloral". Chemical Reviews.
2. Liebig passed dry chlorine gas through anhydrous ethanol for 11–13 days, until hydrogen chloride ceased to form. The product was dried by shaking with concentrated sulfuric acid, decanted over chalk, and then distilled. (Liebig, 1832), pp. 191–194.
3. "Chloroacetaldehydes".