Beef cattle

Calving and breeding

Besides breeding to meet the demand for beef production, owners also use selective breeding to attain specific traits in their beef cattle. An example of a desired trait could be leaner meat or resistance to illness. Breeds known as dual-purpose are also used for beef production. These breeds have been selected for two purposes at once, such as both beef and dairy production, or both beef and draught. Dual-purpose breeds include many of the Zebu breeds of India such as Tharparkar and Ongole Cattle. There are multiple continental breeds that were bred for this purpose as well. The original Simmental/Fleckvieh from Switzerland is a prime example. Not only are they a dual-purpose breed for beef and dairy, but in the past they were also used for draught. However, throughout the generations, the breed has diverged into two groups through selective breeding.

Most beef cattle are mated naturally, whereby a bull is released into a herd of cows approximately 55 days after the calving period, depending on the cows' body condition score (BCS). If it was a cow's first time calving, she will take longer to re-breed by at least 10 days. However, beef cattle can also be bred through artificial insemination, depending on the cow and the size of the herd. Cattle are normally bred during the summer so that calving may occur the following spring. However, cattle breeding can occur at other times of year. Depending on the operation, calving may occur all year round. Owners can select the breeding time based on a number of factors, including reproductive performance, seasonal cattle pricing and handling facilities.

Cattle maintenance

Cattle handlers are expected to maintain a low-stress environment for their herds, involving constant safety, health, comfort, nourishment and humane handling. According to the Canadian National Farm Animal Care Council, beef cattle must have access to shelter from extreme weather, safe handling and equipment, veterinary care and humane slaughter. If an animal is infected or suspected to have an illness, it is the responsibility of the owners to report it immediately to a practicing veterinarian for either treatment or euthanasia. Depending on a multitude of factors (season, type of production system, stocking density, etc.), illness and disease can spread quickly through the herd from animal to animal. Owners are expected to monitor their cattle's condition regularly for early detection and treatment, as some cattle illnesses can threaten both cattle and human health (known as zoonotic) as witnessed with Mad cow disease and Tuberculosis.

On average, cattle will consume 1.4 to 4% of their body weight daily. There is a range of types of feed available for these animals. The standard text in the United States, Nutrient Requirements of Beef Cattle, has been through eight editions over at least 70 years ago. The 1996 seventh edition substituted the concept of metabolizable protein for the sixth edition's crude protein. In the 20th century, Canadian practice followed the American guidance. Already in 1970, the Food and Drug Administration was regulating pharmaceutical supplements in beef cattle feed such as hormones and prophylactic antibiotics.

Some animals live on pasture their entire lives and therefore only experience fresh grass; these are typically cow-calf operations in more tropical climates. Backgrounded calves and feedlot animals tend to have different diets that contain more grain than the pasture type. Grain is more expensive than pasture, but the animals grow faster with the higher protein levels. Since cattle are herbivores and need roughage in their diet, silage, hay and/or haylage are all viable feed options. Despite this, 3/4th of the 32 pounds (14.52 kg) of feed cattle consume each day will be corn. Cattle weighing 1,000 lbs. will drink an average of 41 L a day, and approximately 82 L in hot weather. They need a constant supply of good quality feed and potable water according to the 5 Freedoms of Animal Welfare.

Most beef cattle are finished in feedlots. The first feedlots were constructed in the early 1950s. Some of these feedlots grew so large that they warranted a new designation, "Concentrated Animal Feeding Operation" (CAFO). Most American beef cattle spend the last half of their lives in a CAFO.

Cattle processing

A steer that weighs 1000 lb when alive makes a carcass weighing approximately 615 lb once the blood, head, feet, skin, offal and guts are removed. The carcass is then hung in a cold room for between one and four weeks, during which time it loses some weight as water dries from the meat. It is then deboned and cut by a butcher or packing house, with the finished carcass resulting in approximately 430 lb of beef. Depending on what cuts of meat are desired, there is a scale of marbled meat used to determine the quality. Marbling is the fat that is within the muscle, not around it. The more marbled a cut is, the higher it will grade and be worth.

Slaughtering of livestock has three distinct stages: preslaughter handling, stunning, and slaughtering. The biggest concern is preslaughter handling: how the animal is treated before it is stunned and slaughtered. Stress at this time can cause adverse effects on the meat, but water access and lower stocking densities have been allowed to minimize this. However, access to feed is restricted for 12–24 hours prior to slaughtering for ease of evisceration. Stunning is done when the animal is restrained in a chute so movement is limited. Once restrained the animal can be stunned in one of three methods: penetrating captive bolt, non-penetrating captive bolt, and gunshot. Most abattoirs use captive bolts instead of guns. Stunning ensures the animal feels no pain during slaughtering and reduces the animal's stress, therefore increasing the quality of meat. The final step is slaughtering. Typically the animal will be hung by its back leg and its throat will be slit to allow exsanguination. The hide will be removed for further processing at this point and the animal will be broken down with evisceration and decapitation. The carcass will be placed in a cooler for 24–48 hours prior to the meat being cut.

Environmental impact

Cattle farming is one of the most emissive forms of food generation, and least effective uses of land and water as resources. Cattle emit large amounts of methane resulting from their digestive process, and the process of preparing and transporting beef results in a high output of carbon dioxide. Multiple global agencies and governments, including the United Nations, have cited beef production as a primary driver of climate change, and advise that a global reduction in meat consumption should be pursued.

Cattle farming has also been blamed as one of the primary reasons for rapid deforestation in countries such as Brazil and Indonesia, causing habitat loss when deforested land is used either as pasture or to grow feed crop.

Breeds

References

References

1. "Beef Production". University of Guelph, Animal Sciences.
2. (4 April 2013). "Beef Research School: What's the Latest Research on Antimicrobial Resistance?". RealAgricultureOnline.
3. (10 October 2014). "The History of Fleckvieh Dual Purpose Cattle". Better Dairy Cow.
4. "Pregnant cows, timing of pregnancy, open cows, pregnancy rate". University of Nebraska-Lincoln, Institute of Agriculture and Natural Resources.
5. "Recommended code of practice for the care and handling of farm animals: Beef cattle". Agriculture Canada.
6. Eadie, Jim. (May 16, 2017). "Code of Practice for the Care and Handling of Beef Cattle".
7. "Code of practice for the care and handling of beef cattle: Review of scientific research on priority issues". Agriculture Canada.
8. "How much feed will my cow eat". Ministry of Agriculture Alberta.
9. [https://www.nap.edu/catalog/19014/nutrient-requirements-of-beef-cattle-eighth-revised-edition nap.edu: "Nutrient Requirements of Beef Cattle Eighth Revised Edition (2016)"]
10. [https://www.uaex.edu/publications/PDF/MP391.pdf uaex.edu: "Beef cattle nutrition series - Part 3: Nutrient Requirement Tables"] {{Webarchive. link. (2020-03-02 , University of Arkansas Division of Agriculture publication MP391)
11. [https://archive.org/details/bub_gb_Q2MrAAAAYAAJ/page/n1 National Research Council (U.S.). Subcommittee on Beef Cattle Nutrition: "Nutrient requirements of beef cattle, sixth revised edition 1984"]
12. [https://web.archive.org/web/20070806192500/http://www.carc-crac.ca/common/Factsheet%20-%20Beef%20English.PDF www.carc-crac.ca: "Recommended code of practice for the care and handling of farm animals: Beef Cattle"], p.2 of the 1991 edition
13. [https://archive.org/details/beefcattlefeedin1025weic/page/8 Weichenthal, B. A; Russell, H. G (1970): "Beef cattle feeding suggestions : nutrient requirements, balancing rations, protein supplements, suggested rations" Urbana, IL : [[University of Illinois at Urbana-Champaign]], College of Agriculture, Cooperative Extension Service
14. "Feeding Beef Cattle: Tips for a Healthy, Pasture-Based Diet". Mother Earth News.
15. Pollan, Michael. (2006). "The Omnivores Dilemma". Penguin.
16. "Beef Cattle: The codes of practice". Agriculture Canada.
17. "5 Freedoms of Animal Welfare". Canadian Federation of Humane Societies.
18. "1000 lb. steer to 610 lbs. beef". Oklahoma Food Safety Division.
19. "What is Marbling in Meat?". The Spruce.
20. "Meat processing - Livestock slaughter procedures". Encyclopedia Britannica.
21. "Fact check: How bad is eating meat for the climate? – DW – 10/30/2022".
22. (2019-08-09). "The UN says we need to reduce our meat consumption to fight climate change and improve food security".
23. (2007-03-30). "Tropical Deforestation".