Surf Wiki
Save to docs
general/woodworking

From Surf Wiki (app.surf) — the open knowledge base

Baseboard

Lowest part of an interior wall

Baseboard

Lowest part of an interior wall

Wall.svg
baseboard / skirting board}}

In architecture, a baseboard (also called skirting board, skirting, wainscoting, mopboard, trim, floor molding, or base molding) is usually wooden, MDF or vinyl board covering the lowest part of an interior wall. Its purpose is to cover the joint between the wall surface and the floor. It covers the uneven edge of flooring next to the wall, protects the wall from kicks, abrasion, and furniture, and can serve as a decorative molding.

At its simplest, baseboard consists of a simple plank nailed, screwed or glued to the wall; however, particularly in older houses, it can be made up of a number of moldings for decoration. A baseboard differs from a wainscot; a wainscot typically covers from the floor to around 1-1.5 metres (3' to 5') high (waist or chest height), whereas a baseboard is typically under 0.2 metres (8") high (ankle height).

Materials

Plastic baseboard comes in various plastic compounds, the most common of which is UPVC. It is usually available in white or a flexible version in several colors and is usually glued to the wall. Vinyl baseboard is glued with adhesive and can be difficult to remove or to replace. It has a long lifespan, which can mean lower maintenance.

Wooden baseboard can be available in untreated, lacquered or prepainted versions. Prepainted baseboards can be made from a single piece or finger jointed wood, often softwoods, while hardwoods are either lacquered, or raw for staining and made from a single piece of wood.

Medium-density fibreboard (MDF)) is a common material used for baseboard trim and molding. It is an engineered wood product manufactured from refined wood fibers combined with wax and resin binders. MDF is denser and more rigid than standard particle board and can be easily machined and painted.

Tiles can also be used as a baseboard.

Multi-purpose baseboards

Heaters are sometimes installed in place of or in front of baseboards. These come in electrical and radiator varieties, the latter relying on hot water as their heat source.

Where walls are difficult or expensive to modify, or must be left in their original state, and local regulations allow it, electrical wiring and signal cables may be routed round rooms inside cable channels, also known as trunking, that double as skirting board. The regulations for electrical wiring in the United Kingdom do not allow this type of installation.

References

Sources

References

  1. "Wood Baseboard vs. Vinyl Baseboard {{!}} DoItYourself.com".
  2. Holes, Leslie. (2003-09-02). "Creating the Built Environment: The Practicalities of Designing, Constructing and Owning Buildings". Routledge.
  3. "Wood Baseboard vs. Vinyl Baseboard {{!}} DoItYourself.com".
  4. (5 February 2013). "Barry's Introduction to Construction of Buildings". John Wiley & Sons.
  5. (July 2002). "Baseboard vs. radiator heat".
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

woodworking floors residential-heating architectural-elements
Want to explore this topic further?

Ask Mako anything about Baseboard — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report