From Surf Wiki (app.surf) — the open knowledge base
Bandstacked
The term bandstacked applies to an antenna or satellite feedhorn (LNBF) that is designed to operate on two or more bands of frequencies. Usually, a portion of the radio frequency spectrum that has been divided into a low band and a high band.
This example is for a C Band LNBF that operates with two different local oscillator frequencies.
Model Number B1SAT STACK I/P Frequency 3.7-4.2 GHz O/P Frequency 950-2050 MHz LO Frequency Lower Band 5.15 GHz, Upper Band 5.75 GHz
One application is to send both H and V signals to the receiver on one cable at the same time. Other LNBF are voltage switched by the receiver for V or H signal.
· Extended Frequency 3.7 GHz ~ 4.2 GHz · Bandstacked LNBF
This also can be applied to the design and construction of VHF antennas, typically base station antennas that can cover the VHF low band and high band. This should not be confused with stacked antenna array configurations.
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Bandstacked — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report