From Surf Wiki (app.surf) — the open knowledge base
A514 steel
Type of high-strength steel
Type of high-strength steel
A514 is a particular type of high strength steel, which is quenched and tempered alloy steel, with a yield strength of 100,000 psi (100 ksi or approximately 700 MPa). The ArcelorMittal trademarked name is T-1. A514 is primarily used as a structural steel for building construction. A517 is a closely related alloy that is used for the production of high-strength pressure vessels.
This is a standard set by the standards organization ASTM International, a voluntary standards development organization that sets technical standards for materials, products, systems, and services.
Specifications
A514
The tensile yield strength of A514 alloys is specified as at least 100 ksi for thicknesses up to 2.5 in thick plate, and at least 110 ksi ultimate tensile strength, with a specified ultimate range of 110 -. Plates from 2.5 to thick have specified strength of 90 ksi (yield) and 100 - (ultimate).
A517
A517 steel has equal tensile yield strength, but slightly higher specified ultimate strength of 115 - for thicknesses up to 2.5 in and 105 - for thicknesses 2.5 to.
Usage
A514 steels are used where a weldable, machinable, very high strength steel is required to save weight or meet ultimate strength requirements. It is normally used as a structural steel in building construction, cranes, or other large machines supporting high loads.
In addition, A514 steels are specified by military standards (ETL 18-11) for use as small-arms firing range baffles and deflector plates.
References
References
- [http://pc.arcelormittal.com/NA/plateinformation/documents/en/Inlandflats/ProductBrochure/ARCELORMITTAL%20A514%20AND%20T-1.pdf ArcelorMittal A514 T1 Product Brochure]
- ''Manual of Steel Construction, 8th Edition'', 2nd revised printing, American Institute of Steel Construction, 1987, ch 1 page 1-5
- "ETL 18-11".
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about A514 steel — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report