4.2 cm Pak 41

Background

The idea of tapering the barrel of a gun in order to increase muzzle velocity was worked on by several inventors before it was successfully applied by Hermann Gerlich, a German weapons designer, in the late 1920s. The German Army, using Gerlich's squeeze bore principle, managed to produce three different anti-tank guns based on it: the 2.8 cm schwere Panzerbuchse 41, the 4.2 cm Panzerjägerkanone 41, and the 7.5 cm Panzerabwehrkanone 41.

Description

The 4.2 cm Pak 41 was mounted on the 3.7 cm Pak 36 carriage. Externally, the two guns are very similar to each other, with the only obvious difference being the length of the barrel, which was about 76 cm longer. Other changes include a spaced gun shield which was fitted over the original shield, and replacing of the carriage coil springs with a laminated torsion bar.

Although nominally a 42 mm caliber, the barrel actual caliber was 40.6 mm at the breech end, tapering to 29.4 mm at the muzzle, giving a muzzle velocity of 1265 m/s. The breech was manually operated only. The gun carriage was very similar to the Pak 36.

Armour-piercing (AP) shells for the 4.2 cm Pak 41 had a tungsten carbide core which was encased in a mild steel body which was formed into skirts of a larger caliber. When traveling through the barrel, these skirts were squeezed down increasing gas pressure around the base area of the projectile and subsequently boosting muzzle velocity. While the squeeze bore design successfully increased penetration, it also made designing high-explosive (HE) projectiles much more difficult, and these were rarely used. Other drawbacks was the need for tungsten, which had to be imported, and excessive barrel wear, reducing their service life and making the production of guns uneconomical.

History

Produced in small numbers, it was used by some Fallschirmjäger divisions during 1942−1943, seeing limited use in the Italian front and a wider use in the Eastern front. Production was terminated in the summer 1942 due shortages of manganese (used in some of the carriage components) and tungsten.

Specifications

The 4.2 cm Pak 41 fired AP and HE fixed rounds with a cartridge case length of 348 mm. The complete rounds weighted 1.52 kg for AP rounds and 1.34 kg for HE rounds.

4.2 cm Pzgr Patr 41

A 336 g tungsten carbide-cored AP round with a flanged body. Strongly resembling an upscaled 2.8 cm sPzB 41 round, it also used a magnesium alloy cap that produced a flash upon impact. The propelling charge was 435 g of Gudol RP.

4.2 cm Sprgr Patr 41

A 280 g HE round with a skirted body similar to the rounds used on the 2.8 cm sPzB 41. Nominally it used 310 g of Digl RP propellant, while in practice the propelling charge varied from batch to batch.

References

Bibliography

• Gander, Terry and Chamberlain, Peter. Weapons of the Third Reich: An Encyclopedic Survey of All Small Arms, Artillery and Special Weapons of the German Land Forces 1939−1945. New York: Doubleday, 1979

References

1. German translation of the book "Small Arms, Artillery and Special Weapons of the Third Reich. An encyclopedic survey" by T. Gander and P. Chamberlain (Jane's Publishers Ltd) from 2005 ({{ISBN. 3613024810)