From Surf Wiki (app.surf) — the open knowledge base
.356 Winchester
Rifle cartridge
Rifle cartridge
| Field | Value | |
|---|---|---|
| name | .356 Winchester | |
| image | [[File:356 Winchester cartridge 3D.jpg | 270px]] |
| origin | United States | |
| type | Rifle | |
| designer | Winchester | |
| design_date | 1982 | |
| manufacturer | Winchester | |
| production_date | 1982–present | |
| parent | .307 Winchester | |
| case_type | Semi-rimmed, bottleneck | |
| bullet | .358 | |
| land | .350 | |
| neck | .388 | |
| shoulder | .454 | |
| base | .4703 | |
| rim_dia | .506 | |
| rim_thick | .048 | |
| case_length | 2.015 | |
| length | 2.56 | |
| rifling | 1-12" | |
| max_cup | 52,000 |
The .356 Winchester (9.1x65mmSR) is a semi-rimmed, bottle-necked, centerfire rifle cartridge which was designed for use in lever-action rifles. It was developed concurrently with the .307 Winchester which acted as the parent cartridge. Both cartridges were introduced in 1982 in the then-new Model 94 XTR lever-action rifle.
Description
The .356 Winchester was developed using the case similar to that of the .308 Winchester but which featured a semi-rimmed design so as to operate through a lever-action rifle. Hence the .358 Winchester, which is essentially .308 Winchester necked up to accept a .358 in bullet, is very similar to that of the .356 Winchester, with the only difference being the design of the rim.
Performance of the .356 Winchester is close to that of the .358 Winchester giving up only 50 - with any bullet weight. However, the .356 has slightly less case capacity than the .358 Winchester due to its thicker brass case. Furthermore, heavier bullets will need to be seated more deeply than in the .358 Winchester as the cartridge has to function reliably through a lever rifle's feeding mechanism. For these reasons the factory 250 gr bullet loses about 90 ft/s to the .358 Winchester while the 200 gr factory load is only 30 ft/s slower.
The Marlin Model 336ER was offered in .356 Winchester for several years, but was discontinued in 1987. The same year, Winchester ceased production of their Model 94s chambered for .356 Winchester. It was brought back immediately in 1988, but was again discontinued in the mid-1990s.
Despite its nomenclature, .356 Winchester actually uses a .358 caliber bullet. Olin engineers who developed the .356 Winchester advise against loading it with anything other than flat-nose or Hornady Leverevolution bullets for use in a tubular-magazine lever action rifle. If being loaded for use in single-shot, double-rifle, or most bolt action rifles, any bullet type could be used.
Dimensions
References
References
- "356 Winchester".
- Association, N. R. (n.d.). Saga of the .356 Winchester. An Official Journal Of The NRA. Retrieved May 1, 2023, from https://www.americanrifleman.org/content/saga-of-the-356-winchester/
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about .356 Winchester — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report