Protein

History and etymology

Discovery and early studies

Proteins have been studied and recognized since the 1700s by Antoine Fourcroy and others, who often collectively called them "albumins", or "albuminous materials" (Eiweisskörper, in German). Gluten, for example, was first separated from wheat in published research around 1747, and later determined to exist in many plants. In 1789, Antoine Fourcroy recognized three distinct varieties of animal proteins: albumin, fibrin, and gelatin. Vegetable (plant) proteins studied in the late 1700s and early 1800s included gluten, plant albumin, gliadin, and legumin.

Proteins were first described by the Dutch chemist Gerardus Johannes Mulder and named by the Swedish chemist Jöns Jacob Berzelius in 1838. Mulder carried out elemental analysis of common proteins and found that nearly all proteins had the same empirical formula, C400H620N100O120P1S1. "in the lead", or "standing in front", + -in. Mulder went on to identify the products of protein degradation such as the amino acid leucine for which he found a (nearly correct) molecular weight of .

Early nutritional scientists such as the German Carl von Voit believed that protein was the most important nutrient for maintaining the structure of the body, because it was generally believed that "flesh makes flesh". Thomas Burr Osborne compiled a detailed review of the vegetable proteins at the Connecticut Agricultural Experiment Station. Osborne, alongside Lafayette Mendel, established several nutritionally essential amino acids in feeding experiments with laboratory rats. Diets lacking an essential amino acid stunts the rats' growth, consistent with Liebig's law of the minimum. The final essential amino acid to be discovered, threonine, was identified by William Cumming Rose.

The difficulty in purifying proteins impeded work by early protein biochemists. Proteins could be obtained in large quantities from blood, egg whites, and keratin, but individual proteins were unavailable. In the 1950s, the Armour Hot Dog Company purified 1 kg of bovine pancreatic ribonuclease A and made it freely available to scientists. This gesture helped ribonuclease A become a major target for biochemical study for the following decades.

Polypeptides

The understanding of proteins as polypeptides, or chains of amino acids, came through the work of Franz Hofmeister and Hermann Emil Fischer in 1902. The central role of proteins as enzymes in living organisms that catalyzed reactions was not fully appreciated until 1926, when James B. Sumner showed that the enzyme urease was in fact a protein.

Linus Pauling is credited with the successful prediction of regular protein secondary structures based on hydrogen bonding, an idea first put forth by William Astbury in 1933. Later work by Walter Kauzmann on denaturation, based partly on previous studies by Kaj Linderstrøm-Lang, contributed an understanding of protein folding and structure mediated by hydrophobic interactions.

The first protein to have its amino acid chain sequenced was insulin, by Frederick Sanger, in 1949. Sanger correctly determined the amino acid sequence of insulin, thus conclusively demonstrating that proteins consisted of linear polymers of amino acids rather than branched chains, colloids, or cyclols.

Structure

With the development of X-ray crystallography, it became possible to determine protein structures as well as their sequences. The first protein structures to be solved were hemoglobin by Max Perutz and myoglobin by John Kendrew, in 1958. The use of computers and increasing computing power has supported the sequencing of complex proteins. In 1999, Roger Kornberg sequenced the highly complex structure of RNA polymerase using high intensity X-rays from synchrotrons.

Since then, cryo-electron microscopy (cryo-EM) of large macromolecular assemblies has been developed. Cryo-EM uses protein samples that are frozen rather than crystals, and beams of electrons rather than X-rays. It causes less damage to the sample, allowing scientists to obtain more information and analyze larger structures. Computational protein structure prediction of small protein structural domains has helped researchers to approach atomic-level resolution of protein structures. , the Protein Data Bank contains 181,018 X-ray, 19,809 EM and 12,697 NMR protein structures.

Classification

Main article: Protein family, Gene Ontology, Enzyme Commission number

Proteins are primarily classified by sequence and structure, although other classifications are commonly used. Especially for enzymes the EC number system provides a functional classification scheme. Similarly, gene ontology classifies both genes and proteins by their biological and biochemical function, and by their intracellular location.

Sequence similarity is used to classify proteins both in terms of evolutionary and functional similarity. This may use either whole proteins or protein domains, especially in multi-domain proteins. Protein domains allow protein classification by a combination of sequence, structure and function, and they can be combined in many ways. In an early study of 170,000 proteins, about two-thirds were assigned at least one domain, with larger proteins containing more domains (e.g. proteins larger than 600 amino acids having an average of more than 5 domains).

Biochemistry

Main article: Biochemistry, Amino acid, Peptide bond

Most proteins consist of linear polymers built from series of up to 20 L-α-amino acids. All proteinogenic amino acids have a common structure where an α-carbon is bonded to an amino group, a carboxyl group, and a variable side chain. Only proline differs from this basic structure as its side chain is cyclical, bonding to the amino group, limiting protein chain flexibility. The side chains of the standard amino acids have a variety of chemical structures and properties, and it is the combined effect of all amino acids that determines its three-dimensional structure and chemical reactivity.

The amino acids in a polypeptide chain are linked by peptide bonds between amino and carboxyl group. An individual amino acid in a chain is called a residue, and the linked series of carbon, nitrogen, and oxygen atoms are known as the main chain or protein backbone. The peptide bond has two resonance forms that confer some double-bond character to the backbone. The alpha carbons are roughly coplanar with the nitrogen and the carbonyl (C=O) group. The other two dihedral angles in the peptide bond determine the local shape assumed by the protein backbone. One consequence of the N-C(O) double bond character is that proteins are somewhat rigid. A polypeptide chain ends with a free amino group, known as the N-terminus or amino terminus, and a free carboxyl group, known as the C-terminus or carboxy terminus. By convention, peptide sequences are written N-terminus to C-terminus, correlating with the order in which proteins are synthesized by ribosomes.

The words protein, polypeptide, and peptide are a little ambiguous and can overlap in meaning. Protein is generally used to refer to the complete biological molecule in a stable conformation, whereas peptide is generally reserved for a short amino acid oligomers often lacking a stable 3D structure. But the boundary between the two is not well defined and usually lies near 20–30 residues.

Proteins can interact with many types of molecules and ions, including with other proteins, with lipids, with carbohydrates, and with DNA.

Abundance in cells

A typical bacterial cell, e.g. E. coli and Staphylococcus aureus, is estimated to contain about 2 million proteins. Smaller bacteria, such as Mycoplasma or spirochetes contain fewer molecules, on the order of 50,000 to 1 million. By contrast, eukaryotic cells are larger and thus contain much more protein. For instance, yeast cells have been estimated to contain about 50 million proteins and human cells on the order of 1 to 3 billion. The concentration of individual protein copies ranges from a few molecules per cell up to 20 million. Not all genes coding proteins are expressed in most cells and their number depends on, for example, cell type and external stimuli. For instance, of the 20,000 or so proteins encoded by the human genome, only 6,000 are detected in lymphoblastoid cells. The most abundant protein in nature is thought to be RuBisCO, an enzyme that catalyzes the incorporation of carbon dioxide into organic matter in photosynthesis. Plants can consist of as much as 1% by weight of this enzyme.

Synthesis

Biosynthesis

Main article: Protein biosynthesis

Proteins are assembled from amino acids using information encoded in genes. Each protein has its own unique amino acid sequence that is specified by the nucleotide sequence of the gene encoding this protein. The genetic code is a set of three-nucleotide sets called codons and each three-nucleotide combination designates an amino acid, for example AUG (adenine–uracil–guanine) is the code for methionine. Because DNA contains four nucleotides, the total number of possible codons is 64; hence, there is some redundancy in the genetic code, with some amino acids specified by more than one codon. Genes encoded in DNA are first transcribed into pre-messenger RNA (mRNA) by proteins such as RNA polymerase. Most organisms then process the pre-mRNA (a primary transcript) using various forms of post-transcriptional modification to form the mature mRNA, which is then used as a template for protein synthesis by the ribosome. In prokaryotes the mRNA may either be used as soon as it is produced, or be bound by a ribosome after having moved away from the nucleoid. In contrast, eukaryotes make mRNA in the cell nucleus and then translocate it across the nuclear membrane into the cytoplasm, where protein synthesis then takes place. The rate of protein synthesis is higher in prokaryotes than eukaryotes and can reach up to 20 amino acids per second.

The process of synthesizing a protein from an mRNA template is known as translation. The mRNA is loaded onto the ribosome and is read three nucleotides at a time by matching each codon to its base pairing anticodon located on a transfer RNA molecule, which carries the amino acid corresponding to the codon it recognizes. The enzyme aminoacyl tRNA synthetase "charges" the tRNA molecules with the correct amino acids. The growing polypeptide is often termed the nascent chain. Proteins are always biosynthesized from N-terminus to C-terminus.

The size of a synthesized protein can be measured by the number of amino acids it contains and by its total molecular mass, which is normally reported with the unit dalton (Da), or its derivative unit kilodalton (kDa). The average size of a protein increases from Archaea to Bacteria to Eukaryote (283, 311, 438 residues and 31, 34, 49 kDa respectively) due to a bigger number of protein domains constituting proteins in higher organisms. For instance, yeast proteins are on average 466 amino acids long and 53 kDa in mass. The largest known proteins are the titins, a component of the muscle sarcomere, with a molecular mass of almost and a total length of almost amino acids.

Chemical synthesis

Main article: Peptide synthesis

Short proteins can be synthesized chemically by a family of peptide synthesis methods. These rely on organic synthesis techniques such as chemical ligation to produce peptides in high yield. Chemical synthesis allows for the introduction of non-natural amino acids into polypeptide chains, such as attachment of fluorescent probes to amino acid side chains. These methods are useful in laboratory biochemistry and cell biology, though generally not for commercial applications. Chemical synthesis is inefficient for polypeptides longer than about 300 amino acids, and the synthesized proteins may not readily assume their native tertiary structure. Most chemical synthesis methods proceed from C-terminus to N-terminus, opposite the biological reaction.

Structure

Main article: Protein structure

Most proteins fold into unique 3D structures. The shape into which a protein naturally folds is known as its native conformation. Although many proteins can fold unassisted, simply through the chemical properties of their amino acids, others require the aid of molecular chaperones to fold into their native states. Biochemists often refer to four distinct aspects of a protein's structure:

• Primary structure: the amino acid sequence. A protein is a polyamide.
• Secondary structure: regularly repeating local structures stabilized by hydrogen bonds. The most common examples are the α-helix, β-sheet and turns. Because secondary structures are local, many regions of distinct secondary structure can be present in the same protein molecule.
• Tertiary structure: the overall shape of a single protein molecule; the spatial relationship of the secondary structures to one another. Tertiary structure is generally stabilized by nonlocal interactions, most commonly the formation of a hydrophobic core, but also through salt bridges, hydrogen bonds, disulfide bonds, and even post-translational modifications. The term "tertiary structure" is often used as synonymous with the term fold. The tertiary structure is what controls the basic function of the protein.
• Quaternary structure: the structure formed by several protein molecules (polypeptide chains), usually called protein subunits in this context, which function as a single protein complex.
• Quinary structure: the signatures of protein surface that organize the crowded cellular interior. Quinary structure is dependent on transient, yet essential, macromolecular interactions that occur inside living cells.

Proteins are not entirely rigid molecules. In addition to these levels of structure, proteins may shift between several related structures while they perform their functions. In the context of these functional rearrangements, these tertiary or quaternary structures are usually referred to as "conformations", and transitions between them are called conformational changes. Such changes are often induced by the binding of a substrate molecule to an enzyme's active site, or the physical region of the protein that participates in chemical catalysis. In solution, protein structures vary because of thermal vibration and collisions with other molecules.

Proteins can be informally divided into three main classes, which correlate with typical tertiary structures: globular proteins, fibrous proteins, and membrane proteins. Almost all globular proteins are soluble and many are enzymes. Fibrous proteins are often structural, such as collagen, the major component of connective tissue, or keratin, the protein component of hair and nails. Membrane proteins often serve as receptors or provide channels for polar or charged molecules to pass through the cell membrane.

A special case of intramolecular hydrogen bonds within proteins, poorly shielded from water attack and hence promoting their own dehydration, are called dehydrons.

Protein domains

Main article: Protein domain

Many proteins are composed of several protein domains, i.e. segments of a protein that fold into distinct structural units. Domains usually have specific functions, such as enzymatic activities (e.g. kinase) or they serve as binding modules.

Sequence motif

Short amino acid sequences within proteins often act as recognition sites for other proteins. For instance, SH3 domains typically bind to short PxxP motifs (i.e. 2 prolines [P], separated by two unspecified amino acids [x], although the surrounding amino acids may determine the exact binding specificity). Many such motifs has been collected in the Eukaryotic Linear Motif (ELM) database.

Cellular functions

Proteins are the chief actors within the cell, said to be carrying out the duties specified by the information encoded in genes. The set of proteins expressed in a particular cell or cell type is known as its proteome.

The chief characteristic of proteins that allows their diverse set of functions is their ability to bind other molecules specifically and tightly. The region of the protein responsible for binding another molecule is known as the binding site and is often a depression or "pocket" on the molecular surface. This binding ability is mediated by the tertiary structure of the protein, which defines the binding site pocket, and by the chemical properties of the surrounding amino acids' side chains. Protein binding can be extraordinarily tight and specific; for example, the ribonuclease inhibitor protein binds to human angiogenin with a sub-femtomolar dissociation constant (−15 M) but does not bind at all to its amphibian homolog onconase ( 1 M). Extremely minor chemical changes such as the addition of a single methyl group to a binding partner can sometimes suffice to nearly eliminate binding; for example, the aminoacyl tRNA synthetase specific to the amino acid valine discriminates against the very similar side chain of the amino acid isoleucine.

Proteins can bind to other proteins as well as to small-molecule substrates. When proteins bind specifically to other copies of the same molecule, they can oligomerize to form fibrils; this process occurs often in structural proteins that consist of globular monomers that self-associate to form rigid fibers. Protein–protein interactions regulate enzymatic activity, control progression through the cell cycle, and allow the assembly of large protein complexes that carry out many closely related reactions with a common biological function. Proteins can bind to, or be integrated into, cell membranes. The ability of binding partners to induce conformational changes in proteins allows the construction of enormously complex signaling networks. As interactions between proteins are reversible and depend heavily on the availability of different groups of partner proteins to form aggregates that are capable to carry out discrete sets of function, study of the interactions between specific proteins is a key to understand important aspects of cellular function, and ultimately the properties that distinguish particular cell types.

Enzymes

Main article: Enzyme

The best-known role of proteins in the cell is as enzymes, which catalyse chemical reactions. Enzymes are usually highly specific and accelerate only one or a few chemical reactions. Enzymes carry out most of the reactions involved in metabolism, as well as manipulating DNA in processes such as DNA replication, DNA repair, and transcription. Some enzymes act on other proteins to add or remove chemical groups in a process known as posttranslational modification. About 4,000 reactions are known to be catalysed by enzymes. The rate acceleration conferred by enzymatic catalysis is often enormous—as much as 1017-fold increase in rate over the uncatalysed reaction in the case of orotate decarboxylase (78 million years without the enzyme, 18 milliseconds with the enzyme).

The molecules bound and acted upon by enzymes are called substrates. Although enzymes can consist of hundreds of amino acids, it is usually only a small fraction of the residues that come in contact with the substrate, and an even smaller fraction—three to four residues on average—that are directly involved in catalysis. The region of the enzyme that binds the substrate and contains the catalytic residues is known as the active site.

Dirigent proteins are members of a class of proteins that dictate the stereochemistry of a compound synthesized by other enzymes.

Cell signaling and ligand binding

Many proteins are involved in the process of cell signaling and signal transduction. Some proteins, such as insulin, are extracellular proteins that transmit a signal from the cell in which they were synthesized to other cells in distant tissues. Others are membrane proteins that act as receptors whose main function is to bind a signaling molecule and induce a biochemical response in the cell. Many receptors have a binding site exposed on the cell surface and an effector domain within the cell, which may have enzymatic activity or may undergo a conformational change detected by other proteins within the cell.

Antibodies are protein components of an adaptive immune system whose main function is to bind antigens, or foreign substances in the body, and target them for destruction. Antibodies can be secreted into the extracellular environment or anchored in the membranes of specialized B cells known as plasma cells. Whereas enzymes are limited in their binding affinity for their substrates by the necessity of conducting their reaction, antibodies have no such constraints. An antibody's binding affinity to its target is extraordinarily high.

Many ligand transport proteins bind particular small biomolecules and transport them to other locations in the body of a multicellular organism. These proteins must have a high binding affinity when their ligand is present in high concentrations, and release the ligand when it is present at low concentrations in the target tissues. The canonical example of a ligand-binding protein is haemoglobin, which transports oxygen from the lungs to other organs and tissues in all vertebrates and has close homologs in every biological kingdom. Lectins are sugar-binding proteins which are highly specific for their sugar moieties. Lectins typically play a role in biological recognition phenomena involving cells and proteins. Receptors and hormones are highly specific binding proteins.

Transmembrane proteins can serve as ligand transport proteins that alter the permeability of the cell membrane to small molecules and ions. The membrane alone has a hydrophobic core through which polar or charged molecules cannot diffuse. Membrane proteins contain internal channels that allow such molecules to enter and exit the cell. Many ion channel proteins are specialized to select for only a particular ion; for example, potassium and sodium channels often discriminate for only one of the two ions.

Structural proteins

Structural proteins confer stiffness and rigidity to otherwise-fluid biological components. Most structural proteins are fibrous proteins; for example, collagen and elastin are critical components of connective tissue such as cartilage, and keratin is found in hard or filamentous structures such as hair, nails, feathers, hooves, and some animal shells. Some globular proteins can play structural functions, for example, actin and tubulin are globular and soluble as monomers, but polymerize to form long, stiff fibers that make up the cytoskeleton, which allows the cell to maintain its shape and size.

Other proteins that serve structural functions are motor proteins such as myosin, kinesin, and dynein, which are capable of generating mechanical forces. These proteins are crucial for cellular motility of single celled organisms and the sperm of many multicellular organisms which reproduce sexually. They generate the forces exerted by contracting muscles and play essential roles in intracellular transport.

Methods of study

Main article: Protein methods

Methods commonly used to study protein structure and function include immunohistochemistry, site-directed mutagenesis, X-ray crystallography, nuclear magnetic resonance and mass spectrometry. The activities and structures of proteins may be examined in vitro, in vivo, and in silico. In vitro studies of purified proteins in controlled environments are useful for learning how a protein carries out its function: for example, enzyme kinetics studies explore the chemical mechanism of an enzyme's catalytic activity and its relative affinity for various possible substrate molecules. By contrast, in vivo experiments can provide information about the physiological role of a protein in the context of a cell or even a whole organism, and can often provide more information about protein behavior in different contexts. In silico studies use computational methods to study proteins.

Protein purification

Main article: Protein purification

Proteins may be purified from other cellular components using a variety of techniques such as ultracentrifugation, precipitation, electrophoresis, and chromatography; the advent of genetic engineering has made possible a number of methods to facilitate purification.

To perform in vitro analysis, a protein must be purified away from other cellular components. This process usually begins with cell lysis, in which a cell's membrane is disrupted and its internal contents released into a solution known as a crude lysate. The resulting mixture can be purified using ultracentrifugation, which fractionates the various cellular components into fractions containing soluble proteins; membrane lipids and proteins; cellular organelles, and nucleic acids. Precipitation by a method known as salting out can concentrate the proteins from this lysate. Various types of chromatography are then used to isolate the protein or proteins of interest based on properties such as molecular weight, net charge and binding affinity. The level of purification can be monitored using various types of gel electrophoresis if the desired protein's molecular weight and isoelectric point are known, by spectroscopy if the protein has distinguishable spectroscopic features, or by enzyme assays if the protein has enzymatic activity. Additionally, proteins can be isolated according to their charge using electrofocusing.

For natural proteins, a series of purification steps may be necessary to obtain protein sufficiently pure for laboratory applications. To simplify this process, genetic engineering is often used to add chemical features to proteins that make them easier to purify without affecting their structure or activity. Here, a "tag" consisting of a specific amino acid sequence, often a series of histidine residues (a "His-tag"), is attached to one terminus of the protein. As a result, when the lysate is passed over a chromatography column containing nickel, the histidine residues ligate the nickel and attach to the column while the untagged components of the lysate pass unimpeded. A number of tags have been developed to help researchers purify specific proteins from complex mixtures.

Cellular localization

The study of proteins in vivo is often concerned with the synthesis and localization of the protein within the cell. Although many intracellular proteins are synthesized in the cytoplasm and membrane-bound or secreted proteins in the endoplasmic reticulum, the specifics of how proteins are targeted to specific organelles or cellular structures is often unclear. A useful technique for assessing cellular localization uses genetic engineering to express in a cell a fusion protein or chimera consisting of the natural protein of interest linked to a "reporter" such as green fluorescent protein (GFP). The fused protein's position within the cell can then be cleanly and efficiently visualized using microscopy.

Other methods for elucidating the cellular location of proteins requires the use of known compartmental markers for regions such as the ER, the Golgi, lysosomes or vacuoles, mitochondria, chloroplasts, plasma membrane, etc. With the use of fluorescently tagged versions of these markers or of antibodies to known markers, it becomes much simpler to identify the localization of a protein of interest. For example, indirect immunofluorescence will allow for fluorescence colocalization and demonstration of location. Fluorescent dyes are used to label cellular compartments for a similar purpose.

Other possibilities exist, as well. For example, immunohistochemistry usually uses an antibody to one or more proteins of interest that are conjugated to enzymes yielding either luminescent or chromogenic signals that can be compared between samples, allowing for localization information. Another applicable technique is cofractionation in sucrose (or other material) gradients using isopycnic centrifugation. While this technique does not prove colocalization of a compartment of known density and the protein of interest, it indicates an increased likelihood.

Finally, the gold-standard method of cellular localization is immunoelectron microscopy. This technique uses an antibody to the protein of interest, along with classical electron microscopy techniques. The sample is prepared for normal electron microscopic examination, and then treated with an antibody to the protein of interest that is conjugated to an extremely electro-dense material, usually gold. This allows for the localization of both ultrastructural details as well as the protein of interest.

Through another genetic engineering application known as site-directed mutagenesis, researchers can alter the protein sequence and hence its structure, cellular localization, and susceptibility to regulation. This technique even allows the incorporation of unnatural amino acids into proteins, using modified tRNAs, and may allow the rational design of new proteins with novel properties.

Proteomics

Main article: Proteomics

The total complement of proteins present at a time in a cell or cell type is known as its proteome, and the study of such large-scale data sets defines the field of proteomics, named by analogy to the related field of genomics. Key experimental techniques in proteomics include 2D electrophoresis, which allows the separation of many proteins, mass spectrometry, which allows rapid high-throughput identification of proteins and sequencing of peptides (most often after in-gel digestion), protein microarrays, which allow the detection of the relative levels of the various proteins present in a cell, and two-hybrid screening, which allows the systematic exploration of protein–protein interactions. The total complement of biologically possible such interactions is known as the interactome. A systematic attempt to determine the structures of proteins representing every possible fold is known as structural genomics.

Structure determination

Discovering the tertiary structure of a protein, or the quaternary structure of its complexes, can provide important clues about how the protein performs its function and how it can be affected, i.e. in drug design. As proteins are too small to be seen under a light microscope, other methods have to be employed to determine their structure. Common experimental methods include X-ray crystallography and NMR spectroscopy, both of which can produce structural information at atomic resolution. However, NMR experiments are able to provide information from which a subset of distances between pairs of atoms can be estimated, and the final possible conformations for a protein are determined by solving a distance geometry problem. Dual polarisation interferometry is a quantitative analytical method for measuring the overall protein conformation and conformational changes due to interactions or other stimulus. Circular dichroism is another laboratory technique for determining internal β-sheet / α-helical composition of proteins. Cryoelectron microscopy is used to produce lower-resolution structural information about very large protein complexes, including assembled viruses; a variant known as electron crystallography can produce high-resolution information in some cases, especially for two-dimensional crystals of membrane proteins. Solved structures are usually deposited in the Protein Data Bank (PDB), a freely available resource from which structural data about thousands of proteins can be obtained in the form of Cartesian coordinates for each atom in the protein.

Many more gene sequences are known than protein structures. Further, the set of solved structures is biased toward proteins that can be easily subjected to the conditions required in X-ray crystallography, one of the major structure determination methods. In particular, globular proteins are comparatively easy to crystallize in preparation for X-ray crystallography. Membrane proteins and large protein complexes, by contrast, are difficult to crystallize and are underrepresented in the PDB. Structural genomics initiatives have attempted to remedy these deficiencies by systematically solving representative structures of major fold classes. Protein structure prediction methods attempt to provide a means of generating a plausible structure for proteins whose structures have not been experimentally determined.

Structure prediction

Main article: Protein structure prediction, List of protein structure prediction software

Complementary to the field of structural genomics, protein structure prediction develops efficient mathematical models of proteins to computationally predict the molecular formations in theory, instead of detecting structures with laboratory observation.

In silico simulation of dynamical processes

A more complex computational problem is the prediction of intermolecular interactions, such as in molecular docking, protein folding, protein–protein interaction and chemical reactivity. Mathematical models to simulate these dynamical processes involve molecular mechanics, in particular, molecular dynamics. In this regard, in silico simulations discovered the folding of small α-helical protein domains such as the villin headpiece, the HIV accessory protein and hybrid methods combining standard molecular dynamics with quantum mechanical mathematics have explored the electronic states of rhodopsins.

Beyond classical molecular dynamics, quantum dynamics methods allow the simulation of proteins in atomistic detail with an accurate description of quantum mechanical effects. Examples include the multi-layer multi-configuration time-dependent Hartree method and the hierarchical equations of motion approach, which have been applied to plant cryptochromes

Chemical analysis

The total nitrogen content of organic matter is mainly formed by the amino groups in proteins. The total Kjeldahl nitrogen (TKN) is a measure of nitrogen widely used in the analysis of (waste) water, soil, food, feed and organic matter in general. As the name suggests, the Kjeldahl method is applied. More sensitive methods are available.

Digestion

Main article: Proteolysis, Protein (nutrient)

In the absence of catalysts, proteins are slow to hydrolyze. The breakdown of proteins to small peptides and amino acids (proteolysis) is a step in digestion; these breakdown products are then absorbed in the small intestine. The hydrolysis of proteins relies on enzymes called proteases or peptidases. Proteases, which are themselves proteins, come in several types according to the particular peptide bonds that they cleave as well as their tendency to cleave peptide bonds at the terminus of a protein (exopeptidases) vs peptide bonds at the interior of the protein (endopeptidases). Pepsin is an endopeptidase in the stomach. Subsequent to the stomach, the pancreas secretes other proteases to complete the hydrolysis, these include trypsin and chymotrypsin.

Protein hydrolysis is employed commercially as a means of producing amino acids from bulk sources of protein, such as blood meal, feathers, keratin. Such materials are treated with hot hydrochloric acid, which effects the hydrolysis of the peptide bonds.

Mechanical properties

The mechanical properties of proteins are highly diverse and are often central to their biological function, as in the case of proteins like keratin and collagen. For instance, the ability of muscle tissue to continually expand and contract is directly tied to the elastic properties of their underlying protein makeup. Beyond fibrous proteins, the conformational dynamics of enzymes and the structure of biological membranes, among other biological functions, are governed by the mechanical properties of the proteins. Outside of their biological context, the unique mechanical properties of many proteins, along with their relative sustainability when compared to synthetic polymers, have made them desirable targets for next-generation materials design.

Young's modulus, E, is calculated as the axial stress σ over the resulting strain ε. It is a measure of the relative stiffness of a material. In the context of proteins, this stiffness often directly correlates to biological function. For example, collagen, found in connective tissue, bones, and cartilage, and keratin, found in nails, claws, and hair, have observed stiffnesses that are several orders of magnitude higher than that of elastin, which is thought to give elasticity to structures such as blood vessels, pulmonary tissue, and bladder tissue, among others. In comparison to this, globular proteins, such as Bovine Serum Albumin, which float relatively freely in the cytosol and often function as enzymes (and thus undergoing frequent conformational changes) have comparably much lower Young's moduli.

The Young's modulus of a single protein can be found through molecular dynamics simulation. Using either atomistic force-fields, such as CHARMM or GROMOS, or coarse-grained forcefields like Martini, a single protein molecule can be stretched by a uniaxial force while the resulting extension is recorded in order to calculate the strain. Experimentally, methods such as atomic force microscopy can be used to obtain similar data. The internal dynamics of proteins involve subtle elastic and plastic deformations induced by viscoelastic forces, which can be probed by nano-rheology techniques. These estimates yield typical spring constants around k ≈ 100 pN/nm, equivalent to Young's moduli of E ≈ 100 MPa, and typical friction coefficients of γ ≈ 0.1 pN·s/nm, corresponding to viscosity of η ≈ 0.01 pN·s/nm2 = 107 cP (that is, 107 times more viscous than water).

At the macroscopic level, the Young's modulus of cross-linked protein networks can be obtained through more traditional mechanical testing. Experimentally observed values for a few proteins can be seen below.

Viscosity

In addition to serving as enzymes within the cell, globular proteins often act as key transport molecules. For instance, Serum Albumins, a key component of blood, are necessary for the transport of a multitude of small molecules throughout the body. Because of this, the concentration dependent behavior of these proteins in solution is directly tied to the function of the circulatory system. One way of quantifying this behavior is through the viscosity of the solution.

Viscosity, η, is generally given is a measure of a fluid's resistance to deformation. It can be calculated as the ratio between the applied stress and the rate of change of the resulting shear strain, that is, the rate of deformation. Viscosity of complex liquid mixtures, such as blood, often depends strongly on temperature and solute concentration. For serum albumin, specifically bovine serum albumin, the following relation between viscosity and temperature and concentration can be used. \eta = \exp\left[ \frac{c}{\alpha-\beta\ c}\left(-B +D T + \frac{\Delta E}{R T}\right)\right] where c is the concentration, T is the temperature, R is the gas constant, and α, β, B, D, and ΔE are all material-based property constants. This equation has the form of an Arrhenius equation, assigning viscosity an exponential dependence on temperature and concentration.

References

References

1. (1909). "The Vegetable Proteins".
2. Tanford, Charles. (2001). "Nature's robots: a history of proteins". Oxford; Toronto: Oxford University Press.
3. (1838). "Sur la composition de quelques substances animales". Bulletin des Sciences Physiques et Naturelles en Néerlande.
4. (August 1951). "Origin of the word 'protein'". Nature.
5. (July 2023). "Protein (n.)".
6. (April 1913). "In Memoriam Heinrich Ritthausen". [[Columbia University]] Biochemical Association.
7. (2002-05-03). "Nutritional Biochemistry and the Amino Acid Composition of Proteins: The early years of protein chemistry, the Work of Thomas B. Osborne and Lafayette B. Mendel". Journal of Biological Chemistry.
8. (1916). "The Amino-Acid Minimum for Maintenance and Growth, as Exemplified by Further Experiments with Lysine and Tryptophane". Journal of Biological Chemistry.
9. (2002-09-13). "The Discovery of the Amino Acid Threonine: the Work of William C. Rose". Journal of Biological Chemistry.
10. "Hofmeister, Franz". encyclopedia.com.
11. "Protein, section: Classification of protein". britannica.com.
12. Dill, Ken A.. (1990). "Dominant forces in protein folding". Biochemistry.
13. (1972). "The 1972 nobel prize for chemistry". Science.
14. (2008). "Back to the future: Ribonuclease A". Biopolymers.
15. (1 March 2022). "Structural biology: How proteins got their close-up". Knowable Magazine.
16. "Summary Statistics".
17. (2023). "Enzyme nomenclature and classification: the state of the art". The FEBS Journal.
18. (January 2008). "The Gene Ontology project in 2008". Nucleic Acids Research.
19. (April 2005). "Multi-domain proteins in the three kingdoms of life: orphan domains and other unassigned regions". Journal of Molecular Biology.
20. (2006). "Harper's Illustrated Biochemistry". Lange Medical Books/McGraw-Hill.
21. Reusch, William. (5 May 2013). "Peptides & Proteins".
22. Stryer, Lubert. (2002). "Biochemistry". [[W. H. Freeman and Company]].
23. (August 2017). "Using Cooperatively Folded Peptides To Measure Interaction Energies and Conformational Propensities". Accounts of Chemical Research.
24. (1999). "Introduction to Protein Structure". Garland Pub.
25. (1996). "Biochemistry". Benjamin/Cummings.
26. (December 2013). "What is the total number of protein molecules per cell volume? A call to rethink some published values". BioEssays.
27. (November 2011). "The quantitative proteome of a human cell line". Molecular Systems Biology.
28. (July 2013). "Variation and genetic control of protein abundance in humans". Nature.
29. (1979). "The most abundant protein in the world". Trends in Biochemical Sciences.
30. (January 2017). "Proteome-pI: proteome isoelectric point database". Nucleic Acids Research.
31. (2010). "Biochemistry". Brooks/Cole, Cengage Learning.
32. (2008-02-01). "Ena/VASP: proteins at the tip of the nervous system". Current Opinion in Neurobiology.
33. (January 2012). "Attributes of short linear motifs". Molecular BioSystems.
34. (2020-01-08). "ELM-the eukaryotic linear motif resource in 2020". Nucleic Acids Research.
35. With the exception of certain types of [[RNA]], most other biological molecules are relatively inert elements upon which proteins act. Proteins make up half the dry weight of an ''[[Escherichia coli]]'' cell, whereas other macromolecules such as DNA and RNA make up only 3% and 20%, respectively.Voet D, Voet JG. (2004). ''Biochemistry'' Vol 1 3rd ed. Wiley: Hoboken, NJ.
36. (2001). "Experimental Animal and In Vitro Study Designs". National Academies Press.
37. (July 1987). "Co-operative and allosteric enzymes: 20 years on". European Journal of Biochemistry.
38. (December 2004). "Navigating chemical space for biology and medicine". Nature.
39. (1991). "From data banks to data bases". Research in Microbiology.
40. Hrycaj, Steven. (17 October 2023). "Immunohistochemistry: Origins, Tips, and a Look to the Future".
41. (March 2004). "Prediction and functional analysis of native disorder in proteins from the three kingdoms of life". Journal of Molecular Biology.
42. (2020). "sDMD: An open source program for discontinuous molecular dynamics simulation of protein folding and aggregation". Computer Physics Communications.
43. (August 2013). "A review of methods for sensing the nitrogen status in plants: advantages, disadvantages and recent advances". Sensors.
44. (November 2002). "Determination of soil organic carbon and nitrogen at the field level using near-infrared spectroscopy". Canadian Journal of Soil Science.
45. (1 January 1996). "Rates of Uncatalyzed Peptide Bond Hydrolysis in Neutral Solution and the Transition State Affinities of Proteases". Journal of the American Chemical Society.
46. Keller, J.. (2013). "Encyclopedia of Biological Chemistry". Elsevier.
47. Oda, Kohei. (2012). "New families of carboxyl peptidases: serine-carboxyl peptidases and glutamic peptidases". Journal of Biochemistry.
48. (1 March 2013). "Protein Digestion: An Overview of the Available Techniques and Recent Developments". Journal of Proteome Research.
49. (2007). "Ullmann's Encyclopedia of Industrial Chemistry".
50. (February 2002). "Elastic proteins: biological roles and mechanical properties". Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences.
51. (July 1976). "New elastic protein from muscle". Nature.
52. (February 2012). "Making muscle elastic: the structural basis of myomesin stretching". PLOS Biology.
53. (November 1987). "Viscoelastic models for enzymes with multiple conformational states". Journal of Theoretical Biology.
54. (2024-04-18). "Bioinspired and biomimetic protein-based fibers and their applications". Communications Materials.
55. (September 2023). "Protein fibers with self-recoverable mechanical properties via dynamic imine chemistry". Nature Communications.
56. (2007-10-02). "A comparison of the mechanical and structural properties of fibrin fibers with other protein fibers". Cell Biochemistry and Biophysics.
57. (2021). "Elastin Structure, Synthesis, Regulatory Mechanism and Relationship With Cardiovascular Diseases". Frontiers in Cell and Developmental Biology.
58. (February 1999). "Elastin: molecular description and function". The International Journal of Biochemistry & Cell Biology.
59. (November 2019). "Chemical unfolding of protein domains induces shape change in programmed protein hydrogels". Nature Communications.
60. (October 2020). "Tuning the Structural Integrity and Mechanical Properties of Globular Protein Vesicles by Blending Crosslinkable and NonCrosslinkable Building Blocks". Biomacromolecules.
61. (April 2021). "Martini 3: a general purpose force field for coarse-grained molecular dynamics". Nature Methods.
62. "Piotr Szymczak's Homepage".
63. (August 2021). "Simulation of protein pulling dynamics on second time scale with boxed molecular dynamics". The Journal of Chemical Physics.
64. (September 1999). "Atomic force microscopy captures length phenotypes in single proteins". Proceedings of the National Academy of Sciences of the United States of America.
65. (2025-03-28). "Enzymes as viscoelastic catalytic machines". Nature Physics.
66. (2012-04-03). "The Structure, Functions, and Mechanical Properties of Keratin". JOM.
67. (March 2008). "Mechanical properties of native and cross-linked type I collagen fibrils". Biophysical Journal.
68. (August 2018). "Building Blocks of the Outer Membrane: Calculating a General Elastic Energy Model for β-Barrel Membrane Proteins". Journal of Chemical Theory and Computation.
69. (August 2021). "Structural and Biochemical Features of Human Serum Albumin Essential for Eukaryotic Cell Culture". International Journal of Molecular Sciences.
70. (March 2024). "Concentration Dependence of Elastic and Viscoelastic Properties of Aqueous Solutions of Ficoll and Bovine Serum Albumin by Brillouin Light Scattering Spectroscopy". Langmuir: The ACS Journal of Surfaces and Colloids.
71. (February 1996). "Viscosity of bovine serum albumin aqueous solutions as a function of temperature and concentration". International Journal of Biological Macromolecules.
72. (1860). "Die Gesetze der Ernaehrung des Pflanzenfressers durch neue Untersuchungen festgestellt". C.F. Winter'sche Verlagshandlung.
73. (June 2003). "Interorgan amino acid transport and its regulation". The Journal of Nutrition.
74. (February 2004). "From production of peptides in milligram amounts for research to multi-tons quantities for drugs of the future". Current Pharmaceutical Biotechnology.
75. (August 2000). "Tailoring new enzyme functions by rational redesign". Current Opinion in Structural Biology.
76. (September 2008). "Proteomic approaches in biological and medical sciences: principles and applications". Experimental Oncology.
77. (June 2009). "Sex steroid receptors in skeletal differentiation and epithelial neoplasia: is tissue-specific intervention possible?". BioEssays.
78. (January 2000). "The ENZYME database in 2000". Nucleic Acids Research.
79. (September 2003). "Dehydron: a structurally encoded signal for protein interaction". Biophysical Journal.
80. (April 1991). "Titin, a huge, elastic sarcomeric protein with a probable role in morphogenesis". BioEssays.
81. (December 2005). "Lipid-protein interactions in double-layered two-dimensional AQP0 crystals". Nature.
82. (December 2004). "Current two-dimensional electrophoresis technology for proteomics". Proteomics.
83. (November 2005). "Understanding nature's catalytic toolkit". Trends in Biochemical Sciences.
84. (January 2005). "In silico folding of a three helix protein and characterization of its free-energy landscape in an all-atom force field". Physical Review Letters.
85. (2008). "2D PAGE: Sample Preparation and Fractionation".
86. (August 2006). "Color tuning in rhodopsins: the mechanism for the spectral shift between bacteriorhodopsin and sensory rhodopsin II". Journal of the American Chemical Society.
87. (December 2002). "Incorporation of non-natural amino acids into proteins". Current Opinion in Chemical Biology.
88. (February 1955). "Degradation of ribonuclease by subtilisin". Biochimica et Biophysica Acta.
89. (May 1956). "Structural factors in protein denaturation". Journal of Cellular Physiology. Supplement.
90. Kauzmann, W.. (1959). "Advances in Protein Chemistry". Elsevier.
91. (March 1958). "A three-dimensional model of the myoglobin molecule obtained by x-ray analysis". Nature.
92. (February 2009). "Total chemical synthesis of proteins". Chemical Society Reviews.
93. (April 2008). "Characterization and prediction of protein interfaces to infer protein-protein interaction networks". Current Pharmaceutical Biotechnology.
94. (December 2007). "Improving yeast two-hybrid screening systems". Briefings in Functional Genomics & Proteomics.
95. (November 2003). "Design of a novel globular protein fold with atomic-level accuracy". Science.
96. Sanger F.. (1958). "Nobel lecture: The chemistry of insulin". Nobelprize.org.
97. (2004). "Molecular Cell Biology". WH Freeman and Company.
98. (January 2000). "Green fluorescent protein as a reporter for macromolecular localization in bacterial cells". Methods.
99. (August 2008). "Developments in cell biology for quantitative immunoelectron microscopy based on thin sections: a review". Histochemistry and Cell Biology.
100. (August 1963). ". Structure of haemoglobin. A three-dimensional Fourier synthesis of reduced human haemoglobin at 5.5 Å resolution". Nature.
101. (2005). "Lehninger's Principles of Biochemistry". W. H. Freeman and Company.
102. (2000). "Mechanisms of Protein Folding". Oxford University Press.
103. (May 1951). "Atomic coordinates and structure factors for two helical configurations of polypeptide chains". Proceedings of the National Academy of Sciences of the United States of America.
104. (August 2007). "From 'protein' to the beginnings of clinical proteomics". Proteomics. Clinical Applications.
105. (October 2013). "Dirigent proteins: molecular characteristics and potential biotechnological applications". Applied Microbiology and Biotechnology.
106. (2009). "The interactome: predicting the protein-protein interactions in cells". Cellular & Molecular Biology Letters.
107. (January 1995). "A proficient enzyme". Science.
108. (2003). "Nature's Robots: A History of Proteins (Oxford Paperbacks)". Oxford University Press.
109. (February 2008). "Recent progress and future directions in protein-protein docking". Current Protein & Peptide Science.
110. (April 2000). "Medicinal chemistry based on the sugar code: fundamentals of lectinology and experimental strategies with lectins as targets". Current Medicinal Chemistry.
111. (January 2009). "Regulation of epithelial apical junctional complex by Rho family GTPases". Frontiers in Bioscience.
112. (1949). "The terminal peptides of insulin". The Biochemical Journal.
113. (2001). "The fidelity of the translation of the genetic code". Acta Biochimica Polonica.
114. (2007). "Protein-folding dynamics: overview of molecular simulation techniques". Annual Review of Physical Chemistry.
115. (December 2005). "Protein semisynthesis and expressed protein ligation: chasing a protein's tail". Current Opinion in Chemical Biology.
116. (2012). "Functional Genomics".
117. (July 2008). "Protein structure databases with new web services for structural biology and biomedical research". Briefings in Bioinformatics.
118. (August 2008). "Fluorescent proteins as biomarkers and biosensors: throwing color lights on molecular and cellular processes". Current Protein & Peptide Science.
119. (August 1926). "The Isolation and Crystallization of the Enzyme Urease". Journal of Biological Chemistry.
120. (January 2003). "Overview of tag protein fusions: from molecular and biochemical fundamentals to commercial systems". Applied Microbiology and Biotechnology.
121. EBI External Services. (2010-01-20). "The Catalytic Site Atlas at The European Bioinformatics Institute". Ebi.ac.uk.
122. "RCSB Protein Data Bank".
123. (2004). "Structural genomics of membrane proteins". Genome Biology.
124. (2000). "Principles and Techniques of Practical Biochemistry". Cambridge University Press.
125. (June 2006). "Advances in homology protein structure modeling". Current Protein & Peptide Science.
126. (December 2005). "Fluorescence microscopy today". Nature Methods.
127. (November 2002). "Simulation of folding of a small alpha-helical protein in atomistic detail using worldwide-distributed computing". Journal of Molecular Biology.
128. (February 2003). "Overview of structural genomics: from structure to function". Current Opinion in Chemical Biology.
129. (January 2005). "The protein structure prediction problem could be solved using the current PDB library". Proceedings of the National Academy of Sciences of the United States of America.
130. (June 2008). "Progress and challenges in protein structure prediction". Current Opinion in Structural Biology.
131. (April 2008). "Towards atomic resolution structural determination by single-particle cryo-electron microscopy". Current Opinion in Structural Biology.
132. (August 2012). "Open Quantum Dynamics Calculations with the Hierarchy Equations of Motion on Parallel Computers". Journal of Chemical Theory and Computation.
133. (January 2018). "Multidimensional Quantum Mechanical Modeling of Electron Transfer and Electronic Coherence in Plant Cryptochromes: The Role of Initial Bath Conditions". The Journal of Physical Chemistry B.