Ivan Sutherland's head-mounted 3D display

Features

The device was primitive both in terms of user interface and realism, and the graphics comprising the virtual environment were simple wireframe rooms. Sutherland's system displayed output from a computer program in the stereoscopic display. The perspective that the software showed the user would depend on the position of the user's gaze – which is why head tracking was necessary. The HMD had to be attached to a mechanical arm suspended from the ceiling of the lab partially due to its weight, and primarily to track head movements via linkages. The formidable appearance of the mechanism inspired its name. While using The Sword of Damocles, a user had to have his or her head securely fastened into the device to perform the experiments. At this time, the various components being tested were not fully integrated with one another.

Development

When Sutherland moved to the University of Utah in the late 1960s, work on integrating the various components into a single HMD system was begun. By the end of the decade, the first fully functional integrated HMD system was operational. The first display application was a cube suspended in the air in front of the user. The system itself consisted of six subsystems: a clipping divider, matrix multiplier, vector generator, headset, head-position sensor, and a general-purpose computer – which would make these the components of the first virtual reality machine as we know them today. The unit was partially see-through, so the users were not completely cut off from their surroundings. This translucence combined with the other features in their infancy is why the system is often cited as a precursor to augmented reality technology as well.

Alleged predecessors

Philco HMD

Kalawsky contends that the first HMD fieldwork was conducted by Philco in 1961. Their system used a head mounted display to monitor conditions in another room, using magnetic tracking to monitor the user's head movements. The Philco HMD displayed actual video from a remotely mounted camera. The position of the camera was moved according to the tracked head movements, creating a sense of telepresence.

Bell Helicopter

In 1963, Bell Helicopter company in Fort Worth, Texas, experimented with a pilot-controlled night vision system. The servo-controlled remote viewing device employed a headset displaying an augmented view of the ground for the pilot via an infrared camera mounted under the helicopter. The remote vision system display was similar to the Philco system. Ivan Sutherland's breakthrough was to imagine a computer to supply graphics output to the viewing device. Sutherland modestly stated, "My little contribution to virtual reality was to realize we didn't need a camera – we could substitute a computer. However, in those days no computer was powerful enough to do the job so we had to build special equipment".

References

References

1. "Catchup With Ivan Sutherland - Inventor Of The First AR Headset". Forbes.
2. (23 February 2024). "Catchup With Ivan Sutherland - Inventor Of The First AR Headset".
3. "Stereoscopic-television apparatus for individual use".
4. Conferences, SIGGRAPH. (2018-08-14). "VR @ 50: Ivan Sutherland's 1968 Head-Mounted 3D Display System".
5. Jon, Peddie. (2017). "Augmented reality: where we will all live".
6. [[Ivan Sutherland. (1968). "A head-mounted three dimensional display".
7. [[Ivan Sutherland
8. (1992). "Virtual Reality". Simon & Schuster.
9. Kalawsky, R. S. (1993). ''The Science of Virtual Reality and [[Virtual environment. Virtual Environments]]: A Technical, Scientific and Engineering Reference on Virtual Environments'', Addison-Wesley, Wokingham, England; Reading, Mass.