Skip to content
Surf Wiki
Save to docs
general/32-s-w-long-firearms

From Surf Wiki (app.surf) — the open knowledge base

.32 S&W Long

American handgun cartridge


American handgun cartridge

FieldValue
name.32 S&W Long
image76238comparison.jpgimage_size = 300px
caption.32 S&W Long *(left)* in comparison with [.32 H&R Magnum](32-h-r-magnum) and [7.62×38mmR Nagant](7-62x38mmr)
originUnited States
typeRevolver
designerSmith & Wesson
design_date1896
production_date1896–Present
parent[.32 S&W](32-s-w)
case_typeRimmed, straight
bullet.312
neck.337
base.337
rim_dia.375
rim_thick.055
case_length.920
length1.280
primerSmall pistol
max_pressure15000
bw198
btype1LHBWC
vel1718
en1112
bw290
btype2LSWC
vel2765
en2117
bw385
btype3JHP
vel3723
en399
balsrcHodgdon

The .32 S&W Long / 7.65x23mmR, often called the .32 Long, is a straight-walled, centerfire, rimmed handgun cartridge, based on the earlier .32 S&W cartridge. It was introduced in 1896 for Smith & Wesson's first-model Hand Ejector revolver. Colt called it the .32 Colt New Police in revolvers it made chambered for the cartridge.

History

The .32 S&W Long, a lengthened version of the earlier .32 S&W, was introduced in 1896 with the Smith & Wesson (S&W) .32 Hand Ejector revolver, which, with its swing-out cylinder, has been the basis for every S&W revolver designed since. In its original form, the cartridge was loaded with black powder. In 1903, the small Hand Ejector was slightly redesigned. The cartridge retained the same dimensions, but was now loaded with smokeless powder to roughly the same chamber pressure.

When he was the New York City Police Commissioner, Theodore Roosevelt standardized the department's use of the Colt New Police revolver. The cartridge was then adopted by several other northeastern U.S. police departments. The .32 Long is well known as an unusually accurate cartridge. This reputation led Police Commissioner Roosevelt to select it as an expedient way to increase officers' accuracy with their revolvers in New York City. The Colt company referred to the .32 S&W Long cartridge as the .32 "Colt's New Police" cartridge, concurrent with the conversion of the Colt New Police revolver from .32 Long Colt. The cartridges are functionally identical with the exception that the .32 NP cartridge has been historically loaded with a flat nosed bullet as opposed to the round nose of the .32 S&W Long.

Current use

In the United States, it is usually older revolvers which are chambered in this caliber. The cartridge has mostly fallen out of use because similarly sized revolvers chambered in .38 Special are more effective for self-defense. The cartridge is widely used internationally, particularly in countries like India that restrict the calibers available to civilian firearms owners. Revolvers are still produced in this caliber in South America, South Asia, and Eastern Europe.

The .32 S&W Long is popular among international competitors in ISSF 25 meter center-fire pistol, using high-end target pistols from makers such as Pardini Arms, Morini, Hämmerli, Benelli, and Walther, among others, but chambered for wadcutter bullet type. The sporting variant of the Manurhin MR 73, also known as MR 32, is also chambered in .32 S&W Long.

The IOF .32 Revolver manufactured by the Ordnance Factories Organization in India for civilian licence holders is chambered for this cartridge.

Interchangeability

The .32 S&W Long headspaces on the rim and shares the rim dimensions and case and bullet diameters of the shorter .32 S&W cartridge and the longer .32 H&R Magnum and .327 Federal Magnum cartridges. The shorter .32 S&W may be fired in handguns chambered for the .32 S&W Long; and the .32 S&W Long may be fired in arms chambered for the longer .32 H&R and .327 Federal magnums; although the longer cartridges should not fit and must not be fired in arms designed for the shorter and less powerful cartridges.

The .32 S&W Long and .32 Long Colt are not interchangeable. At one time it was widely publicized that these rounds would interchange, but in truth it has never been deemed safe to do so.

References

References

  1. ".32 S&W Long data at Hodgdon".
  2. "Revolver 0.32 (7.65 mm x 23)".
  3. Barnes, Frank C.. (2009). "Cartridges of the World: A Complete and Illustrated Reference for Over 1500 Cartridges". Gun Digest Books.
  4. "[http://www.gunblast.com/Cumpston_32Colt.htm .32 Colt Police Positive Special]" by Mike Cumpston at GunBlast.com
  5. (29 August 2004). "Pistols of the World". [[David & Charles]].
  6. (29 August 2004). "Pistols of the World". David & Charles.
  7. Lee, Jerry. (18 December 2013). "2014 Standard Catalog of Firearms: The Collector's Price & Reference Guide". [[Krause Publications]].
  8. (29 August 2004). "Pistols of the World". David & Charles.
  9. Shideler, Dan. (28 February 2011). "Gun Digest Book of Semi-Auto Pistols". Gun Digest Books.
  10. Sweeney, Patrick. (24 October 2011). "Reloading for Handgunners". Krause Publications.
  11. McNab, Chris. (2004). "The Great Book of Guns: An Illustrated History of Military, Sporting, and Antique Firearms". Thunder Bay Press.
  12. Walker, Robert E.. (2013). "Cartridges and Firearm Identification". [[CRC Press]].
  13. Treakle, John W.. (May 2011). ".32 H&R Mag. Cartridge Compatibility". [[American Rifleman]].
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about .32 S&W Long — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report