HM7B

European rocket engine


title: "HM7B" type: doc version: 1 created: 2026-02-28 author: "Wikipedia contributors" status: active scope: public tags: ["spacecraft-propulsion", "rocket-engines-using-hydrogen-propellant", "space-program-of-france", "rocket-engines-using-the-gas-generator-cycle"] description: "European rocket engine" topic_path: "geography/france" source: "https://en.wikipedia.org/wiki/HM7B" license: "CC BY-SA 4.0" wikipedia_page_id: 0 wikipedia_revision_id: 0

::summary European rocket engine ::

::data[format=table title="Infobox rocket engine"]

FieldValue
nameHM7B
imageSNECMA HM7B rocket engine.jpg
country_of_originFrance
first_date24 December 1979
designerSnecma
manufacturerSnecma
purposeUpper stage engine
predecessorHM4
successorVinci
statusRetired
typeliquid
oxidiserLOX
fuel
mixture_ratio5:1
cycleGas-generator
combustion_chamber1
nozzle_ratio83.1:1
thrust(Vac)62.2 kN
chamber_pressure37 bar
specific_impulse_vacuum444.6 isp
length2.01 m
diameter0.992 m
dry_weight165 kg
used_in{{plainlist
references
::

| name = HM7B | image = SNECMA HM7B rocket engine.jpg | image_size = | caption = | country_of_origin = France | date = | first_date = 24 December 1979 | last_date = | designer = Snecma | manufacturer = Snecma | purpose = Upper stage engine | associated = | predecessor = HM4 | successor = Vinci | status = Retired | type = liquid | oxidiser = LOX | fuel = | mixture_ratio = 5:1 | cycle = Gas-generator | pumps = | description = | combustion_chamber = 1 | nozzle_ratio = 83.1:1 | thrust = | thrust_at_altitude = | thrust(Vac) = 62.2 kN | thrust(SL) = | thrust_to_weight = | chamber_pressure = 37 bar | specific_impulse = | specific_impulse_vacuum = 444.6 isp | specific_impulse_sea_level = | total_impulse = | burn_time = | capacity = | dimensions = | length = 2.01 m | diameter = 0.992 m | dry_weight = 165 kg | used_in = {{plainlist|

The HM7B was a European cryogenic upper stage rocket engine used on the vehicles in the Ariane rocket family. It was replaced by Vinci, which acts as the new upper stage engine on Ariane 6. Nearly 300 engines have been produced to date.

History

The development of HM7 engine begun in 1973 on a base of HM4 rocket engine. It was designed to power a third stage of newly constructed Ariane 1, the first launch system for European Space Agency. Maiden flight took place on 24 December 1979 successfully placing CAT-1 satellite on the orbit. With the later introduction of Ariane 2 and Ariane 3 it became necessary to improve the performance of the upper stage engine. This was achieved by extending the nozzle length and increasing the chamber pressure from 30 to 35 bar, increasing the engine's specific impulse and resulting in a nominal burn time increase from 570 to 735 seconds. Qualification tests were completed in 1983 and this upgraded variant was designated HM7B. It was also used on the Ariane 4 vehicle's upper stage where the burn time was further increased to 780 seconds, and since 12 February 2005 it's also used on the upper stage of Ariane 5 ECA.

Overview

The HM7B is a regeneratively cooled gas generator rocket engine fed with liquid oxygen and liquid hydrogen. It has no restart capability: the engine is continuously fired for 950 seconds in its Ariane 5 version (780 s in the Ariane 4). It provides 62.7 kN of thrust with a specific impulse of 444.6 s. The engine's chamber pressure is 3.5 MPa.

References

References

  1. B.T.C. Zandbergen. "Simple mass and size estimation relationships of pump fed rocket engines for launch vehicle conceptual design".
  2. Snecma S.A.. "HM7B - Snecma".
  3. Safran Group. (December 2012). "Safran: Shooting for the StarS".
  4. Airbus Air and Defence. "HM-7 and HM-7B Rocket Engine - Thrust Chamber".

::callout[type=info title="Wikipedia Source"] This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page. ::

spacecraft-propulsionrocket-engines-using-hydrogen-propellantspace-program-of-francerocket-engines-using-the-gas-generator-cycle