Bowen Bridge
Bridge crossing the Derwent River in Tasmania, Australia
title: "Bowen Bridge" type: doc version: 1 created: 2026-02-28 author: "Wikipedia contributors" status: active scope: public tags: ["bridges-completed-in-1984", "bridges-in-hobart", "cantilever-bridges-in-australia", "concrete-bridges-in-australia", "river-derwent-(tasmania)", "road-bridges-in-tasmania", "1984-establishments-in-australia"] description: "Bridge crossing the Derwent River in Tasmania, Australia" topic_path: "geography/australia" source: "https://en.wikipedia.org/wiki/Bowen_Bridge" license: "CC BY-SA 4.0" wikipedia_page_id: 0 wikipedia_revision_id: 0
::summary Bridge crossing the Derwent River in Tasmania, Australia ::
::data[format=table title="Infobox bridge"]
| Field | Value |
|---|---|
| bridge_name | Bowen Bridge |
| image | Bowen Bridge from W shore1.JPG |
| caption | The Bowen Bridge from the western shore |
| carries | Goodwood Road |
| crosses | River Derwent |
| locale | Hobart, Tasmania |
| owner | Department of State Growth |
| preceded | Bridgewater Bridge |
| followed | Tasman Bridge |
| design | Segmental cantilever |
| named_for | John Bowen |
| mainspan | 109 m |
| spans | 10 |
| length | 976 m |
| width | 21.4 m |
| below | 17.3 m |
| builder | Leighton-Candac |
| open | 23 February 1984 |
| coordinates | |
| :: |
| bridge_name = Bowen Bridge | image = Bowen Bridge from W shore1.JPG | caption = The Bowen Bridge from the western shore | official_name = | carries = Goodwood Road | crosses = River Derwent | locale = Hobart, Tasmania | owner = Department of State Growth | preceded = Bridgewater Bridge | followed = Tasman Bridge | design = Segmental cantilever | named_for = John Bowen | mainspan = 109 m | spans = 10 | length = 976 m | width = 21.4 m | height = | clearance = | below = 17.3 m | builder = Leighton-Candac | traffic = | open = 23 February 1984 | closed = | toll = | map_cue = | map_image = | map_text = | map_width = | coordinates = | lat = | long = The Bowen Bridge is a segmental cantilever road bridge crossing the River Derwent in Tasmania, Australia. The bridge serves as a vital transportation link in the state capital of Hobart, facilitating the movement of vehicles, pedestrians, and cyclists between the local government areas of Clarence on the eastern shore and Glenorchy on the western shore. The Bowen Bridge links the East Derwent Highway with the Brooker Highway (as Goodwood Road) at Glenorchy, approximately 10 km from the Hobart city centre.
The Bowen Bridge is composed of eight river spans, each measuring 109 m. The end spans are 48 m and 56 m long. It maintains a consistent deck width of 21.4 m, accommodating a 7.42 m divided highway with two lanes each, along with two separated shared-use walkways.
The Bowen Bridge takes its name from British colonist John Bowen, who founded the first European settlement in Tasmania (then Van Diemen's Land) at Risdon Cove on the eastern shore. Bowen subsequently moved the colony to the western side of the River Derwent, where the Hobart city centre is located today. Prime Minister Malcolm Fraser revealed the bridge's name at a public ceremony at Dowsings Point on 10 October 1980.
History
Situated approximately halfway between the Tasman Bridge and the Bridgewater Bridge, the Bowen Bridge was constructed to mitigate any future failure of the city's bridges following the Tasman Bridge disaster. The State and Federal Governments established the Joint Committee in November 1975 to oversee the design and construction of a bridge across the River Derwent near Dowsings Point. Maunsell and Partners served as consulting engineers and Leighton-Candac, awarded the contract in 1980, completed the construction.
Design
The foundational design primarily aimed to ensure the river piers could withstand impacts from barges traveling at operating speeds (6 kn) assisted by the current (1 kn). All piers were specifically engineered to endure an impact force of 1600 t at an angle of up to 45 degrees from the pile cap centre line, while other directions could sustain a force of 1000 t. This approach accounted for potential impact from future river barges of up to 5000 t of deadweight tonnage. The underlying philosophy involved creating substantial gravity-based foundation structures capable of generating adequate force to absorb the energy and deform the bows of barges during impact.
The design strategy also allowed for future reinforcement to withstand a force of 2900 t, accommodating potential deadweight tonnage impact of 10000 t. To meet these ship impact criteria, the river pier foundations were constructed as massive reinforced concrete caisson structures, measuring 13.3 m in outer diameter with 1.2 m wall thickness, built from the ground up.
The deepest among the nine piers extended to 48 m below mean sea level. Noteworthy statistics include a total concrete mass of 105000 t, a reinforcing steel mass of 3300 t, and a cumulative length of steel tendons reaching 760 km.
Construction
Leighton Contractors implemented a highly efficient balanced cantilever construction technique, notably avoiding the use of falsework within the river – a pioneering approach in Australia at that time. To streamline the construction process, segments were match cast, enabling the deck to be constructed concurrently with the establishment of substantial foundations. This segmental design facilitated swift assembly of the superstructure. The superstructure itself consists of two individual box girders that were erected side by side and connected by an in situ longitudinal joint. The segments were cast in the sequence of their installation. Subsequent segments were directly cast against preceding adjacent segments, utilising a debonding agent on the adjacent surface to allow for separation.
The bridge cost 49 million to construct and was officially opened on 23 February 1984 by Prime Minister Bob Hawke.
Gallery
Bowen Bridge.jpg|The bridge from the Derwent River (facing south).
References
Sources
References
- (1984). "PM Opens new bridge in Tasmania". [[CIMIC Group.
- Clarence City Council. "History".
- "Bowen Bridge - Version One - construction of Bowen Bridge - joint venture Leighton Contractors and Candac Ltd - features Bob Hawke opening bridge". Libraries Tasmania.
- Second Hobart bridge contract awarded ''[[Freight & Container Transportation]]'' July 1980 page 5
- Hobart ''[[Transit Australia. Electric Traction]]'' May 1984 page 93
- "Speech by Bob Hawke at Bowen Bridge official opening ceremony".
::callout[type=info title="Wikipedia Source"] This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page. ::